(C104SE1) Quartz Stoppered Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104SE1

Original price was: $160.00.Current price is: $144.00.

In Stock

C104SE1 is a quartz stoppered cuvette with a 10 mm optical path, Four-Way Light geometry and 3.5 mL nominal capacity. The included PTFE stopper gives covered top access, while the four optical sides support setups that use more than one beam direction around the same cell body. Supplied as 1 cuvette per price unit.

In Stock

SKU: C104SE1 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SE1 is a quartz stoppered cuvette with a 10 mm optical path, Four-Way Light geometry and 3.5 mL nominal capacity. It suits methods that use the common 10 mm path while also benefiting from optical access on all four vertical sides of the cell. The PTFE stopper is included, and this listing is supplied as 1 cuvette per price unit.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Stoppered Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
Overall Height without Closure	45 mm
External Dimensions Scope	Uncapped Cell
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Stopper
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C104SE1 when you want a single quartz cuvette with a covered top opening and four-side optical access. This format is useful when your setup needs the familiar 10 mm path but also depends on controlled cell orientation or side optical access around the same body, instead of a simple two-face transmission cell.

What makes this option different

10 mm optical path for methods written around the common 10 mm cuvette format.
Four-Way Light body for optical access on all four vertical sides.
PTFE stopper included for direct top filling and covered routine handling.
3.5 mL nominal capacity in a full-size rectangular cuvette body.
12.5 × 12.5 × 45 mm uncapped body for checking holder fit separately from closure clearance.
Sold as 1 cuvette per price unit rather than a supplier multi-pack.

Using this cell

Fill from the top so the sample covers the beam region used by your instrument, then place the PTFE stopper gently. When your method depends on a particular cell orientation, keep the same orientation for blank and sample and check that bubbles are not crossing the optical path.

The four optical sides give more freedom in how the cell is presented to the beam and any side access in the setup, but they do not by themselves establish compatibility with every instrument geometry. Keep the optical faces clean and free from fingerprints, residue and exterior droplets.

First-use check

Inspect all optical faces, edges and the top opening before first use.
Place the empty cell in the holder to confirm seating and top clearance for the stopper.
After filling, verify that the selected beam path is fully covered and free of bubbles.

Fit and optical alignment

The uncapped external dimensions are 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. Use these body dimensions to check holder seating, and leave additional space above the holder because the stated height excludes the stopper.

Z Height is not established for this item. If your instrument requires a specific beam-center height, check the actual holder and beam position rather than relying only on the outside size. Reference drawings collected for this SKU are available in the product images.

Solvents and cleaning

This cell has a quartz body and a PTFE stopper. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning.

The exact chemical limits for the complete assembly are not established here, so if your sample or cleaning routine involves aggressive chemicals, long contact with the closure or unusual temperatures, check suitability before use. Rinse promptly after use and clean the optical faces with non-abrasive optical tissue. For general background on construction options, see MQ Cuvette Fabrication Glossary.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the critical dimensions and tolerances for your application.

You can discuss your requirements at https://machinedquartz.com/contact/ and quote part number C104SE1.