(C102CS90) Quartz Standard Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102CS90

Original price was: $29.00.Current price is: $27.00.

In Stock

JGS3 quartz standard cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. This single-cell option has an open top, includes a lid, and the selected ordinary version is marked for neutral solutions. Sold as 1 cuvette (1pc/ea).

In Stock

SKU: C102CS90 Categories: Cuvettes, Infrared (IR) Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS90 is a JGS3 quartz standard cuvette with a 10 mm optical path in a familiar rectangular body. This single-cell option combines a Two-Way Light layout, 3.5 mL nominal capacity and an open top with an included lid, so it suits routine filling and straight-through transmission work. The selected ordinary version is marked for neutral solutions, which is an important part of choosing and using this cell.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Infrared Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	260 nm
Wavelength Range — Upper Limit	3500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS3
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C102CS90 when you need one standard-format quartz cuvette with direct top access and a fixed 10 mm path. It is a practical choice for routine bench work where you want manual filling, a covered cell between steps, and chemistry that stays within the stated neutral-solution use of this selected version.

What makes this option different

10 mm optical path for a fixed 1 cm transmission measurement path.
Two-Way Light layout for a straight beam through opposing optical faces.
Open-top body with included lid for direct filling and covered handling.
3.5 mL nominal capacity for routine liquid loading in this standard cell format.
JGS3 quartz body with a stated 260–3500 nm range.
Neutral-solution use for this selected ordinary version.

Using this cell

Fill the cell from the open top and use the lid when you want the sample covered between handling steps or during measurement. Keep the optical faces clean, remove visible bubbles from the beam area, and use the same orientation for blank and sample to keep handling consistent.

This is still an open-top cuvette rather than a pressure-rated or flow-through assembly. The 3.5 mL value is a nominal capacity, not a minimum working volume, so methods that depend on low fill level or exact beam coverage should be checked in the actual holder.

First-use check

Inspect the optical faces for residue, scratches or transport damage.
Test-fit the uncapped body in your holder and confirm clean beam passage through the intended faces.
Rinse with a suitable method liquid and run a blank before routine sample measurements.

Fit and optical alignment

The stated 12.5 × 12.5 × 45 mm dimensions describe the uncapped cell body. That helps with holder seating and compartment clearance, but it does not include any extra height needed when the lid is fitted or removed during loading.

Z Height is not stated for this SKU. If your instrument holder requires a specific beam-center height, check that directly rather than assuming fit from the outer body size alone.

Solvents and cleaning

This selected ordinary version is marked for neutral solutions. That restriction matters both for the sample and for any rinse or cleaning liquid that contacts the assembly, because a complete validated solvent list is not supplied for this exact SKU.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently. For background on cuvette construction terms, see the MQ Cuvette Fabrication Glossary.

Included with this option

Price is for one cuvette. A lid is included with this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes such as dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication, and tolerance requirements. Send a dimensioned drawing or labelled sketch together with instrument or holder details, sample chemistry, concentration, temperature, contact time and quantity through our contact page. Prototype batches typically involve 2–4 cells, with final feasibility, price and production time confirmed in quotation.