(C50.82CS2) Glass Colorimetric Cuvette, 50.8 mm Path, 30 mL

Weight	100 g

SKU: C50.82CS2

Original price was: $13.00.Current price is: $12.00.

In Stock

Glass colorimetric cuvette with a 50.8 mm optical path, 30 mL nominal capacity and an open-top rectangular body for direct filling. This format suits colour-comparison work that uses a long path and a larger sample chamber. Supplied as 1 cuvette.

In Stock

SKU: C50.82CS2 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C50.82CS2 is a glass colorimetric cuvette for colour measurement methods that use a 50.8 mm optical path. Its open-top body and 30 mL nominal capacity give you a straightforward fill-and-read format, while the rectangular 54.8 × 20 × 40 mm body helps you check holder fit before you commit to this size.

Path Length: 50.8 mm
Sample Volume (Nominal): 30 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	50.8 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	30 mL
External Dimensions	54.8 × 20 × 40 mm
Cell Body Dimensions	54.8 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	54.8 × 20 mm
Material	Glass
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose this cuvette when your method is built around a 50.8 mm path and you want an open sample chamber rather than a connected flow layout. The longer path, larger nominal capacity and defined rectangular body format are the practical points to match against your instrument holder and sample-handling routine.

What makes this option different

50.8 mm optical path for colour-comparison methods that use this long-path format.
30 mL nominal capacity for a larger filled sample volume than a small analytical cell.
Open-top body for direct filling, emptying and rinsing from above.
54.8 × 20 × 40 mm body size to check holder seating and surrounding clearance.

Using this cell

Fill from the top opening and make sure the sample fully covers the beam region used by your instrument. Remove visible bubbles before measurement, especially if your procedure depends on a stable visual or optical comparison through the full path.

Handle the cuvette by the outer non-optical surfaces where possible, and keep the measuring faces clean and dry. After use, empty the cell promptly and rinse it with a cleaning routine that suits the liquid you have used.

First-use check

Inspect the optical faces and top opening for dust, chips or transit residue.
Place the empty cell in the holder to confirm seating and clearance.
Fill with a suitable blank and verify that the filled sample region aligns cleanly with the beam.

Fit and optical alignment

The stated 54.8 × 20 × 40 mm dimensions apply to the body only. They are useful for checking whether your holder accepts this rectangular format and whether you have enough clearance around the cell for insertion and removal.

Z Height is not specified for this item. If your instrument uses a fixed beam center or a tightly defined holder position, check beam-height alignment against your current cell or fixture before ordering rather than relying on body height alone.

Solvents and cleaning

This is a glass cell, but specific chemical limits are not listed here. Choose sample and cleaning liquids according to the glass compatibility required by your own method.

Avoid abrasive cleaning materials that can mark the optical faces. For general cuvette construction background, see Compare fabrication options.

Included with this option

Supplied as 1 cuvette. No closure or additional accessory is specified for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For related custom cuvette enquiries, send your holder details, critical dimensions, required path length and sample conditions. Discuss your requirements and mention part number C50.82CS2.