Site Navigation

(MQACC022) PTFE Screw Cap for 10 mm Cuvettes, 12 mm OD

Weight50 g
SKU: MQACC022

$17.00

In Stock

PTFE screw cap for the matching 10 mm path cuvette format, with a 12 mm outer diameter and 11 mm cap height. Its ribbed exterior provides a grip for hand fitting. Supplied as one cap; the cuvette is sold separately.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQACC022 is a PTFE screw cap for the listed 10 mm path screw-cap cuvette format. Its 12 mm outer diameter and 11 mm body height help when you need a replacement cap and must keep the top clearance of the assembled cuvette in view. This listing is for the cap only, supplied as 1 piece.

Closure Type
Screw Cap

Selection Specifications

Product KindAccessory
Compatible Cuvette Path Length10 mm
Body Height11 mm
Outer Diameter (OD)12 mm
Closure TypeScrew Cap
Closure MaterialPTFE
Pack Quantity1 Piece
Sales Unitpiece
Package Contents1 × Cuvette cap/lid

Choose this option

Choose this cap when you need the matching PTFE screw-top closure for the listed 10 mm path cuvette format. It is especially useful for replacement and spare-part ordering where the cap must match an existing assembly and where holder walls, covers or nearby hardware limit the space above the cuvette.

What makes this option different

  • Separate accessory: sold as a cap only, not a complete cuvette.
  • For the listed 10 mm path format: intended for a matching screw-cap cuvette assembly.
  • 12 mm outer diameter: a practical dimension for checking replacement fit.
  • 11 mm body height: helps you review top clearance before ordering.

Using this accessory

Fit the cap onto the matching cuvette top with the cell supported, then tighten gently. Keep the mating area clean so the cap can be fitted and removed smoothly during routine use, especially if the assembly is opened frequently between samples.

This item is a closure component rather than a complete optical cell. The 10 mm path designation identifies the intended cuvette format, while the cap dimensions are the main guides for physical fit around the top of the assembly.

First-use check

  1. Inspect the cap and the cuvette top for damage or contamination.
  2. Test the fit by hand on the intended assembly.
  3. Check that the fitted cap can still be reached and removed comfortably in your holder or compartment.

Fit and installation

View the English selection reference.

Check this cap against your cuvette SKU or the top dimensions of the mating part. The 12 mm outer diameter and 11 mm height are the key dimensions to review when clearance around the top of the assembly is limited.

The 12 mm dimension is the cap outer diameter, not an M12 thread designation. The 10 mm path label describes the intended cuvette format, not the cap bore. Match the actual thread diameter, pitch and seating shape to your cell; these details, insertion depth and sealing performance are not specified here.

English selection reference
Selection reference ↗

Handling and cleaning

Use handling and cleaning methods suitable for PTFE and for the complete cuvette assembly. If your process involves demanding chemicals, heat or long contact time, check suitability for the assembled setup rather than assuming this cap alone defines the limit.

Included with this option

1 PTFE screw cap. Cuvettes are not included.

Availability and ordering

Order this listed option directly, or contact us to check current availability and dispatch timing. For a required delivery date, please ask before checkout. Preparation time is separate from carrier transit and customs clearance.

Need a different fit?

Contact us with SKU MQACC022 and the cuvette SKU or mating dimensions you need to match.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQACC022) PTFE Screw Cap for 10 mm Cuvettes, 12 mm OD”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare