(MQACC036) PTFE Cuvette Stopper, 10 mm Base Diameter, 10 mm Height
Description
MQACC036 is a PTFE stopper for a cuvette format associated with a 10 mm path cell. Its stepped profile has a 10 mm base diameter and 10 mm overall height. Compare the wider base and narrower upper section with your existing stopper, as the largest diameter alone does not define the receiving opening. This listing is for one stopper only, not a complete cuvette.
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Accessory |
|---|---|
| Compatible Cuvette Path Length | 10 mm |
| Body Height | 10 mm |
| Outer Diameter (OD) | 10 mm |
| Closure Type | Stopper |
| Closure Material | PTFE |
| Pack Quantity | 1 Piece |
| Sales Unit | piece |
| Package Contents | 1 × Cuvette cap/lid |
Choose this option
Choose MQACC036 when you need this PTFE stopper format for an existing cuvette that uses the same mating size. It is a straightforward replacement or spare part option when the closure must match both the top opening and the available handling clearance around the cuvette.
What makes this option different
- PTFE stopper accessory for the listed cuvette format.
- Associated with a 10 mm path cuvette format.
- 10 mm base diameter at the widest part of the stepped profile, distinct from the narrower upper section.
- 10 mm body height for checking clearance above the cell.
Using this accessory
Test the stopper on a clean, empty cuvette before routine use. Support the cell body during fitting so the cuvette rim is not stressed while you check the seating and handling.
This item is a closure accessory only. It does not replace the need to match the actual opening and seat on the cuvette you already have.
First-use check
- Inspect the stopper and cuvette opening for visible damage, chips or residue.
- Confirm that the stopper seats on the empty cell without forcing.
- Check that you can remove and reinstall it cleanly before introducing sample.
Fit and installation
The 10 mm diameter belongs to the wider base, not a specified bore or upper-section diameter. Match the full stopper profile and seating shape to your cell; the upper-section diameter and insertion depth are not stated. Assess clearance with the stopper fitted, including room to lift it out.
If you are replacing a missing stopper, the cuvette SKU or a drawing of the closure area is the best way to avoid a mismatch. Body height should not be treated as insertion depth or as a statement of sealing performance.

Handling and cleaning
Clean the PTFE stopper with a method suitable for the complete cuvette assembly and the liquids used in your work. Avoid abrasive cleaning on the seating surfaces.
No pressure, leak or chemical-use rating is specified for this accessory. Where operating conditions are demanding, check suitability for the full cell-and-closure combination.
Included with this option
One PTFE stopper. The cuvette is sold separately.
Availability and ordering
Order this listed option directly, or contact us to check current availability and dispatch timing. For a required delivery date, please ask before checkout. Preparation time is separate from carrier transit and customs clearance.
Need a different fit?
Contact us with the mating cuvette SKU or the closure-area dimensions if you need a different stopper fit.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.