(MQACC040) PTFE Square Lid for 35 mm Path Sample Cells
Description
MQACC040 is a square PTFE lid for the corresponding 35 mm path sample-cell format. A 41 × 41 mm outer flange surrounds a smaller 34 × 34 mm raised square, giving you two distinct surfaces to compare with an existing lid or cell drawing.
- Closure Type
- Lid
Selection Specifications
| Product Kind | Accessory |
|---|---|
| Compatible Cuvette Path Length | 35 mm |
| Base Dimensions | 41 × 41 mm |
| Closure Type | Lid |
| Closure Material | PTFE |
| Pack Quantity | 1 Piece |
| Sales Unit | piece |
| Package Contents | 1 × Cuvette cap/lid |
Choose this option
Choose this square format when the cell has a broad square top, rather than the narrow rectangular opening used by a different cuvette style. The outer flange lies around the raised section; matching both areas is more useful than choosing by the 35 mm path designation alone.
What makes this option different
- 41 × 41 mm flange: identifies the wider outer footprint and the space it occupies around the cell top.
- 34 × 34 mm raised square: identifies the central profile to compare with the receiving opening or recess.
- Separate 3 mm and 3 mm profile labels: use the individual dimensions shown on the photograph for shape comparison.
- One separate PTFE lid: a replacement or spare for a cell with the corresponding top geometry.
Structure and dimensions

Using this accessory
Support the cell and place the lid gently on clean mating surfaces. Lift it clear during filling or sample changes, then set it on a clean surface before refitting. The wider flange gives a visible edge around the central raised section when handling the lid.
First-use check
Inspect the lid and cell rim for residue, edge damage or distortion. Trial-fit on a clean, empty cell; the lid should sit evenly and lift off without force.
Fit and installation
Compare the outer flange, raised square and available clearance with your original part. The 35 mm designation describes the intended cell path, not a dimension of the lid. The separate 3 mm and 3 mm labels do not specify insertion depth or the height of a complete cuvette with the lid fitted.

Handling and cleaning
Use a non-abrasive cleaning method suitable for PTFE, the cell body and your sample. Check chemical and temperature suitability for the complete assembly. No leak-tightness or pressure rating is specified for this separate lid.
Included with this option
One PTFE cuvette lid. The cuvette is sold separately.
Availability and ordering
Order directly, or ask us about current availability and dispatch. Preparation time is separate from transit and customs clearance; ask before checkout if you need a particular delivery date.
Need a different fit?
For a different fit, send your cuvette SKU and mating dimensions or a drawing.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.