(MQACC055) Silicone Cuvette Lid for 100 mm Path Cells
Description
MQACC055 is a rectangular silicone lid for the corresponding 100 mm path cuvette format. Its 102.5 × 12.5 mm outer base surrounds a 100 × 10 mm raised section, so the lid can be selected by the actual top profile when replacing a missing or worn cover.
- Closure Type
- Lid
Selection Specifications
| Product Kind | Accessory |
|---|---|
| Compatible Cuvette Path Length | 100 mm |
| Base Dimensions | 102.5 × 12.5 mm |
| Closure Type | Lid |
| Closure Material | Silicone |
| Pack Quantity | 1 Piece |
| Sales Unit | piece |
| Package Contents | 1 × Cuvette cap/lid |
Choose this option
The 102.5 mm long base distinguishes this lid from shorter covers. Its 100 × 10 mm raised section is the second selection point: compare it with the cell opening as well as checking that the outer base clears the surrounding holder or clamps.
What makes this option different
- 102.5 × 12.5 mm outer base: defines the footprint around the opening.
- 100 × 10 mm raised section: identifies the central profile to match to your existing cell.
- 3 mm and 2 mm profile labels: shown separately on the dimensional photograph, rather than as a stated installed height.
- Silicone cover, supplied separately: one lid for the corresponding cuvette top.
Structure and dimensions

Using this accessory
Support the empty cell and align the raised section with the mating top before seating the lid gently. During sample changes, lift the cover clear of the rim and keep the contact surfaces free from residue. Leave room above the cell to place and remove the lid by hand.
First-use check
Inspect the lid and cell rim for residue, edge damage or distortion. Trial-fit on a clean, empty cell; the lid should sit evenly and lift off without force.
Fit and installation
The 100 mm path designation identifies the intended cuvette format; it is not a fit guarantee for every cell with that path length. Compare the 102.5 × 12.5 mm base and 100 × 10 mm raised section with your original lid or drawing. The separate 3 mm and 2 mm labels do not establish insertion depth or the overall height of the assembled cell.

Handling and cleaning
Use a non-abrasive cleaning method suitable for silicone, the cuvette body and your sample. Check chemical and temperature suitability for all parts in contact with liquid. This lid has no specified pressure rating or repeated needle-puncture/self-sealing performance.
Included with this option
One silicone cuvette lid. The cuvette is sold separately.
Availability and ordering
Order directly, or ask us about current availability and dispatch. Preparation time is separate from transit and customs clearance; ask before checkout if you need a particular delivery date.
Need a different fit?
For a different fit, send your cuvette SKU and mating dimensions or a drawing.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.