(MQQFC084) Quartz Flow Cell, 2 mm path, 225 µL nominal capacity, Elongated Optical Window
Description
MQQFC084 is a JGS1 quartz flow cell for UV/Vis work with a 2 mm optical path, 225 µL nominal capacity and an elongated 17.5 × 6.5 mm optical window. Its two top fluid connections place both tubing access points on the same side of the assembly, which can be useful when routing lines from above is easier than connecting through opposite ends.
This option suits installations that need a short-path flow cell in a compact body while keeping the connection area above the optical section. The listed sale unit is one cell.
- Path Length
- 2 mm
- Sample Volume (Nominal)
- 225 µL
- Opening Configuration
- Two Top Fluid Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 2 mm |
| Light Transmission Configuration | Two-Way Light |
| Optical Window Dimensions | 17.5 × 6.5 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 225 µL |
| External Dimensions | 12.5 × 12.5 × 47 mm |
| External Dimensions Scope | Installed Assembly |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Top Fluid Connections |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC084 when your setup benefits from three specific features together: a short 2 mm optical path, a top-entry connection layout and a long, clearly defined optical window. That combination is useful when the holder space is compact but the tubing needs to remain accessible from above during installation, priming or cleaning.
What makes this option different
- 2 mm optical path suits short-path UV/Vis methods in a flow-cell format.
- 225 µL nominal capacity provides a compact liquid volume without switching to an open-top cell.
- 17.5 × 6.5 mm elongated optical window gives a clearly defined optical face on the body.
- Two top fluid connections with 4 mm OD / 2 mm ID tubes keep tubing access above the cell assembly.
Structure and dimensions

Using this cell
Mount the cell so both top connections remain accessible during assembly, priming and cleaning. Connect the fluid lines with light support on the body, then fill slowly to wet the chamber evenly and clear bubbles from the optical region before measurement.
For routine use, blank the system after the cell is installed in its final position. The 225 µL figure is a nominal capacity, not a minimum working volume, so the operating fill should be set by the assembled flow path and by keeping the beam area fully covered.
First-use check
- Inspect the window area and both top connection points before installation.
- Seat the cell in the holder and confirm that the beam crosses the intended optical faces cleanly.
- Prime with a suitable blank, remove visible bubbles and repeat the blank after the tubing settles into its final position.
Fit and optical alignment
View the English selection reference.
The stated 12.5 × 12.5 × 47 mm dimensions apply to the installed fixed assembly. Leave extra vertical space above the cell for the two top connections, attached tubing and bend radius.
Z Height is not established for this item. If your holder or instrument has a fixed beam position, check beam alignment separately rather than relying on the external dimensions alone.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is generally suited to room-temperature water-based samples and buffer systems. Avoid organic samples and organic cleaning solvents with this construction.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue, and ask us to review the conditions if your method involves elevated temperature, aggressive liquids or long soaking steps.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz flow cells if you need a different path length, window format, connection layout, external envelope or holder-related dimensions. If top clearance, beam height or chemical conditions are important in your setup, send your drawing or holder details together with the sample liquid, concentration, temperature, contact time and required quantity through our contact page.
Additional information
| Weight | 1125 g |
|---|
You must be logged in to post a review.














Reviews
There are no reviews yet.