(MQQFC141) Quartz Flow Cell, 10 mm path, 3.5 mL nominal capacity, Upright Threaded-Tube Layout
$179.00
MQQFC141 is a JGS1 quartz flow cell for UV/Vis work, with a 10 mm optical path, 3.5 mL nominal capacity and two top M4 hollow threaded connections. Its upright 12.5 × 12.5 mm body and two-way light layout suit transmission measurements where tubing enters from above. Supplied as 1 piece.
Description
MQQFC141 is an upright JGS1 quartz flow cell for UV/Vis setups that use a 10 mm optical path and top-mounted fluid connections. Its 3.5 mL nominal capacity, compact 12.5 × 12.5 mm body section and two top M4 hollow threaded connections make it a practical choice when you want to plan the cell, tubing approach and holder clearance as one assembly.
This is a two-way light cell, so the optical path runs through one transmission axis across opposing faces. The fixed cell envelope is 12.5 × 12.5 × 60 mm, with a 45 mm body height, while the top connection area needs separate space for fittings and tubing above the cell.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Two Top Hollow Threaded Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12.5 × 12.5 × 60 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| Uncapped Cell Dimensions | 12.5 × 12.5 × 60 mm |
| External Dimensions Scope | Uncapped Cell |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Port Thread | M4 |
| Tube Outer Diameter (OD) | 3.4 mm |
| Tube Inner Diameter (ID) | 1.5 mm |
| Opening Configuration | Two Top Hollow Threaded Connections |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC141 when you need a 10 mm UV/Vis flow cell with both fluid connections brought to the top of the body. This layout can be useful in upright installations where side access is limited or where your tubing route is easier to manage from above, while the two-way light arrangement keeps the optical setup focused on a single transmission direction.
What makes this option different
- Two top M4 connections: both fluid connections are positioned at the top of the cell body.
- 10 mm optical path with Two-Way Light: suited to transmission measurements across one optical axis.
- Compact upright format: 12.5 × 12.5 mm body section with 45 mm body height.
- Connection tube dimensions shown: 3.4 mm outer diameter and 1.5 mm inner diameter for planning tubing and fittings.
Using this cell
Install the cell so the body is supported securely and the optical faces remain accessible for alignment and cleaning. Connect the fluid lines without using the projecting threaded tubes as lifting or support points.
Fill the cell gradually and clear visible bubbles from the optical region before establishing the blank. Inlet and outlet roles are not assigned here, so your own system layout should define the fluid direction.
First-use check
- Inspect the optical faces and connection ends for chips, residue or transit damage.
- Check holder fit and top-side tubing clearance before introducing liquid.
- Run a blank only after the cell is filled and the optical region is free of visible bubbles.
Fit and optical alignment
View the English selection reference.
Check the body envelope and the top-connection clearance separately. The fixed cell envelope is 12.5 × 12.5 × 60 mm, and the tubing approach above the cell needs additional room for connectors and bend radius.
Z Height is not established for this SKU, so beam position should be checked against your holder or current cell before ordering. Pressure limits are also not established here, so operating conditions should be set for the complete assembled fluid path.

Solvents and cleaning
This item uses fused-integrated construction in supplier terminology, but a specific MQ fabrication category is not established here. Choose sample and cleaning conditions for the full wetted assembly, including your tubing and any added fittings, especially for aggressive liquids, elevated temperature or long contact time.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently, and flush the flow path with a method suitable for the complete assembly.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz flow cells for changes involving path length, body dimensions, connection style, optical windows, Z Height and related fit details. Send a labelled sketch or drawing together with your holder information, tubing details, liquid conditions and required quantity.
Send a product-selection enquiry with SKU MQQFC141 and your holder or fluid-path details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.