(MQQFL014) Quartz Screw-Top Cuvette, 10 mm path, 3.5 mL nominal capacity, Upright and Angled Openings
$365.00
MQQFL014 is a JGS1 quartz screw-top cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light layout and 3.5 mL nominal capacity. Two M10 threaded sample-access necks with PTFE screw caps give covered top access while keeping four optical sides available. Supplied as 1 piece with accompanying closure.
Description
MQQFL014 is a JGS1 quartz screw-top cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light layout and 3.5 mL nominal capacity. Its two threaded M10 sample-access necks let you fill or handle the sample from above while keeping the chamber covered with PTFE screw caps. Supplied as 1 piece with accompanying closure, it suits setups that need both multi-side optical access and defined top-entry handling.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Two Threaded Sample-Access Necks
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12.5 × 12.5 × 35 mm |
| Body Height | 35 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Caps |
| Closure Material | PTFE |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Threaded Sample-Access Necks |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQFL014 when your fluorescence setup benefits from optical access on four sides and you want a covered sample chamber rather than an open-top cell. The two threaded necks are useful when filling, dosing or sampling access needs to be planned together with the optical layout, instead of treating the cuvette as a simple single-opening body.
What makes this option different
- Four-Way Light layout for fluorescence geometries that use optical access from multiple sides.
- Two threaded M10 sample-access necks for defined top-entry handling above the cell body.
- 3.5 mL nominal capacity in a compact upright cuvette format.
- JGS1 quartz with PTFE screw caps included for a quartz cell supplied ready for covered use.
Using this cell
Fill the cell through the threaded necks so the liquid covers the measurement region, then seat the PTFE caps before moving the cuvette into the holder. Keep the same orientation for blank and sample work, and clear any bubbles from the optical path before measurement.
The threaded necks are sample-access openings, not a stated pressure-rated fluid connection. If your procedure involves inserted tools, dosing steps or repeated opening during preparation, plan that access above the cell before placing it into a holder with tight overhead clearance.
First-use check
- Inspect the optical faces, neck openings and threads before first use.
- Test holder fit and beam alignment with a suitable blank.
- After filling, confirm that the optical faces are clean and that no bubbles remain in the light path.
Fit and optical alignment
The bare optical body is 12.5 × 12.5 × 35 mm. This is useful for checking the holder footprint, but it does not include the projecting necks, caps or the full assembled envelope, so leave room above the holder for cap handling and access to both openings.
View the English selection reference.
Z Height is not established for this SKU. If your instrument has a fixed beam height or tight holder geometry, check the beam position against your own fixture before ordering.

Solvents and cleaning
Molded 83 is the listed fabrication for this cuvette. This type is commonly chosen for organic-solvent methods and applications that may involve temperature, but suitability still depends on the complete assembly, including the PTFE caps and your actual chemical conditions.
Chemical limits are not fully established for this exact SKU, so for aggressive chemicals, elevated temperature or extended contact time, please check the liquid, concentration, temperature and exposure time with us before use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaners, and wipe optical faces gently with non-abrasive optical tissue.
Included with this option
1 quartz screw-top cuvette with accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving path length, capacity, external envelope, optical windows, Z Height, closure details and related tolerances. Send your drawing or labelled sketch, holder or instrument information, sample conditions and quantity requirement.
Prototype batches typically involve 2–4 cells; feasibility, final specification, quantity, price and production time are confirmed in the project quotation. Send a product-selection enquiry and quote MQQFL014.
Design notes for this configuration: Two-Opening Quartz Cuvette: Planning Sample Access (MQQFL014)
Additional information
| Weight | 60 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.