(MQQHC024) Quartz Trapezoidal Cell, 30 mm Path Length, 85 mL
$773.00
Open-top JGS1 quartz trapezoidal cell with a 30 mm optical path, Four-Way Light layout and 85 mL nominal capacity for UV/Vis spectroscopy. Its tapered body combines a 30 × 30 mm internal opening with a 92 × 34 mm base for setups that need a large non-standard sample chamber. Supplied as 1 piece.
Description
MQQHC024 is an open-top JGS1 quartz trapezoidal cell for UV/Vis spectroscopy with a 30 mm optical path and 85 mL nominal capacity. Its tapered chamber, Four-Way Light layout and large top opening make it suitable when a standard square cuvette is too small and your holder can support a wider non-rectangular body.
- Path Length
- 30 mm
- Sample Volume (Nominal)
- 85 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Trapezoidal Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 30 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 85 mL |
| Base Dimensions | 92 × 34 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| MQ Grade | Standard 80 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Internal Opening Dimensions | 30 × 30 mm |
| External Top Dimensions | 34 × 34 mm |
| Base Length | 92 mm |
| Internal Height | 60 mm |
| Wall Thickness | 2 mm |
| Bottom Thickness | 3 mm |
| Side Angle | 65 ° |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Trapezoidal Cell |
Choose this option
Choose this cell when your method needs a larger open sample region together with a 30 mm path in a non-standard shape. The trapezoidal body gives you a broad base and a square top opening for direct filling and cleaning, while the four-way optical layout supports light access through the side faces of the cell. This format is most useful where the holder, compartment clearance and beam position can be planned around the actual body geometry rather than around a standard compact cuvette outline.
What makes this option different
- 30 mm optical path: suited to methods that require a longer transmission path than a standard 10 mm cell.
- 85 mL nominal capacity: a large open chamber for applications that work with a substantial sample volume, not a micro-volume format.
- Open-top chamber: direct access from above simplifies filling, rinsing and visual checking of the liquid level.
- Four-Way Light layout: side optical access from multiple faces can be useful when the cell orientation matters in your UV/Vis setup.
- Trapezoidal body: the base and upper section are intentionally different, so the cell should be selected as a shaped vessel rather than treated as a simple rectangular block.
- Large top opening: the 30 × 30 mm internal opening and 34 × 34 mm external top give practical clearance for pouring, pipetting and cleaning tools.
Using this cell
Fill the chamber from the open top and use a repeatable filling routine for blanks and samples. Because this is a tapered chamber, the liquid level should be established consistently in your method instead of being treated as though the internal space were a straight rectangular well. Remove bubbles from the optical region before measurement, especially after pouring larger sample volumes.
The 85 mL figure is a nominal capacity for the chamber, not a minimum working volume. If your method depends on a specific beam height or partial fill condition, confirm that arrangement in your actual holder.
First-use check
- Inspect the optical faces, open rim and bonded joints before first use.
- Place the cell in the intended support and confirm that the base is fully supported without forcing the tapered sides.
- Establish a repeatable fill level that covers the intended beam path, then run a blank before testing samples.
Fit and optical alignment
This cell should be fitted according to its trapezoidal geometry. The base is 92 × 34 mm, the external top is 34 × 34 mm, and the internal top opening is 30 × 30 mm. The internal chamber height is 60 mm, with 2 mm wall thickness, 3 mm bottom thickness and 65° side angles shown in the drawing.
The drawing also shows a 70 mm dimension along the sloping side, which should not be treated as the vertical overall height. Z Height is not stated for this SKU, so if your instrument requires a defined beam-center position, check that fit directly in your holder and compartment.
View the English selection reference. Also available in the product gallery.

Solvents and cleaning
Standard 80 is an adhesive-bonded quartz construction. For this type of cell, it is typically chosen for water-based samples and buffers at room temperature. If your method involves organic solvents, select conditions carefully and consider a fabrication type intended for that use.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis, abrasive cleaners and cleaning routines that can stress bonded joints. Clean the optical faces gently, rinse residue promptly after use and avoid heated or prolonged soaking unless you have confirmed compatibility for the complete assembled cell.
Included with this option
1 MQQHC024 trapezoidal cell. Price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different tapered profile, opening size, path length or sample volume, send a dimensioned drawing or labelled sketch together with the holder dimensions and beam position. Include the sample liquid, temperature, contact time and any critical fit limits.
Custom enquiries generally use JGS1 quartz, and prototype batches typically involve 2–4 cells. Final feasibility, specifications, quantity, price and production time are confirmed in the project quotation.
Discuss a custom version or send an enquiry with SKU MQQHC024, quantity and delivery destination.
Design notes for this configuration: Trapezoidal Quartz Sample Cell: Defining the Sloping Walls and Base
Additional information
| Weight | 425 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.