(MQQSC016) Quartz Screw-Top Cuvette, 10 mm path, Flat Base and Wide Screw Neck
$257.00
MQQSC016 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity for UV/Vis spectroscopy. This option combines a flat-bottom profile with an M12 wide screw neck and a PTFE cap for direct filling and capped sample handling. Supplied as 1 piece.
Description
MQQSC016 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path and 3.5 mL nominal capacity. Its flat-bottom profile, Two-Way Light layout and M12 wide screw neck make it a practical choice when you want straightforward top access for filling and a capped sample chamber for routine transmission measurements. This listing is for one cuvette.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Screw-Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12.5 × 12.5 × 35 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Port Thread | M12 |
| Fabrication Method | Molded 0.01 |
| Opening Configuration | Screw-Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC016 when your method uses a 10 mm transmission path and you want a screw-top quartz cell with direct top access rather than an open chamber. The flat-bottom version is a specific profile of this model, separate from path length and body footprint, and the M12 neck gives you a defined threaded closure format for filling, capping and handling.
What makes this option different
- 10 mm optical path for UV/Vis methods written around this path length.
- Two-Way Light configuration for straight-through measurement across two opposite optical faces.
- Flat-bottom profile as the specified base style for this exact option.
- M12 wide screw neck for threaded top closure selection and direct sample access from above.
- PTFE screw cap included for the listed capped configuration.
- 3.5 mL nominal capacity for routine sample handling in a full-size cell rather than a micro-volume format.
- Molded 0.01 fabrication for projects selecting this quartz fabrication style and cleaning direction.
Structure and dimensions

Using this cell
Fill the cuvette from the top opening, then fit the cap if your procedure uses the cell in its closed configuration. Before measurement, remove exterior droplets and visible bubbles from the beam path area, and keep the same orientation for blank and sample.
The 3.5 mL figure is the nominal capacity of the cell. It should not be treated as a minimum working volume, so low-fill methods or setups with a fixed beam height should be checked in the actual holder.
First-use check
- Inspect the optical faces, neck and chamber for chips, residue or handling marks.
- Place the cell in your holder and confirm that the beam passes through the intended opposite faces.
- Fit and remove the cap once in your working space to confirm top clearance and handling access.
Fit and optical alignment
The body measures 12.5 × 12.5 × 35 mm, and the overall height is 58 mm with the cap fitted. Use these dimensions to check holder width and the vertical clearance needed above the holder for the screw neck and cap.
View the English selection reference for the current geometry. Z Height is not established for this SKU, so if your instrument uses a fixed beam position, check beam alignment against your holder before ordering. The M12 thread identifies the closure format at the top opening; it is not a pressure-rated fluid connection.

Solvents and cleaning
Molded 0.01 is the option to consider when your method calls for closely specified optical-path precision. For the 10 mm path on this cell, agree the required tolerance and measurement conditions for the order.
This fabrication is commonly selected where quartz solvent handling may go beyond simple water-based use, but solvent suitability still depends on the complete assembled cell, the actual chemical, concentration, temperature, contact time and your cleaning routine.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Screw-Top Cuvette with accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to path length, capacity, external dimensions, windows or Z Height, closure details and fabrication or tolerance requirements. Send your drawing or labelled sketch, holder or instrument details, sample conditions and target quantity through our contact page, and mention SKU MQQSC016.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.












Reviews
There are no reviews yet.