(MQQSC017) Quartz Screw-Top Cuvette, 10 mm path, Flat Base and Wide Screw Neck, Pack of 2
$514.00
MQQSC017 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity for UV/Vis spectroscopy. This option combines a flat-bottom profile with an M12 wide screw neck and PTFE closures for direct filling and capped sample handling. The listed price is for a pack of 2.
Description
MQQSC017 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path and 3.5 mL nominal capacity. Its flat-bottom profile, Two-Way Light layout and M12 wide screw neck suit routine straight-through measurements where you want direct top filling and a threaded cap arrangement. This option is supplied as a pack of 2.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Screw-Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12.5 × 12.5 × 35 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Port Thread | M12 |
| Fabrication Method | Molded 0.01 |
| Opening Configuration | Screw-Top |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQSC017 when your method uses a 10 mm transmission path and you want two cuvettes in the same listed screw-top configuration. The flat-bottom version keeps this exact profile visible as part of selection, while the M12 neck provides a defined threaded top opening for filling, capping and repeat handling in UV/Vis work.
What makes this option different
- 10 mm optical path for UV/Vis methods built around this path length.
- Two-Way Light configuration for straight-through measurement across two opposite optical faces.
- Flat-bottom profile as the specified profile for this exact version.
- M12 wide screw neck for threaded top closure selection and direct sample access.
- PTFE closures included for the listed capped configuration.
- 3.5 mL nominal capacity per cell for routine sample handling in a full-size cuvette format.
- Pack of 2 as the priced sale unit.
Using this cell
Fill each cell from the top opening, then fit the cap if your procedure uses the cuvette in its closed configuration. Wipe off exterior droplets, clear visible bubbles from the beam path area and keep the same orientation for blank and sample when comparing results.
The 3.5 mL figure is the nominal capacity of each cell. It is not a minimum working volume, so low-fill methods should be checked in the actual instrument and holder arrangement before routine use.
First-use check
- Inspect the optical faces, chamber and neck of each cuvette before first use.
- Test one cell in your holder with a suitable blank and confirm the beam passes through the intended opposite faces.
- Check cap clearance in your working setup before adopting the cell for routine runs.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
Check the holder opening against the 12.5 × 12.5 mm base and allow for the 35 mm body height. If you will cap or uncap the cuvette in place, also allow clearance above the holder for the neck and for the capped overall height of 58 mm.
Z Height is not established for this SKU, so beam-center fit should be checked against your instrument or holder requirement before ordering. The M12 thread identifies the closure format at the top opening; it should not be treated as a pressure-rated connection.

Solvents and cleaning
Molded 0.01 is the option to consider when your method calls for closely specified optical-path precision. For the 10 mm path on this cell, agree the required tolerance and measurement conditions for the order.
This fabrication is often selected for quartz methods that may involve organic solvents, but solvent suitability still depends on the full assembly, including the PTFE closures, and on the actual chemical, concentration, temperature, contact time and cleaning method used in your process.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners, and wipe the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
2 quartz screw-top cuvettes with accompanying closures. The listed price is for this pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, closure details and fabrication or tolerance targets. Send your drawing or holder details, required path, sample conditions and quantity through our contact page so we can review feasibility for your project, and reference SKU MQQSC017.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.












Reviews
There are no reviews yet.