(MQQSC074) Quartz Screw-Top Cuvette, 10 mm path, 100 mm Height with Cap
$468.00
Quartz screw-top cuvette for UV/Vis work with a 10 mm optical path, Two-Way Light layout and 8000 µL nominal capacity. Its single M12 threaded neck and supplied closure suit covered sample handling, while the square optical body gives a straightforward transmission-cell format. Sold individually as 1 piece with an accompanying closure.
Description
MQQSC074 is a JGS1 quartz screw-top cuvette for UV/Vis measurements with a 10 mm optical path and 8000 µL nominal capacity. It combines a square optical body with a single threaded neck and supplied closure, making it a practical choice when you want a covered sample cell rather than an open-top chamber. The Two-Way Light layout keeps the optical use focused on a defined transmission direction.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 8 mL
- Opening Configuration
- Single Threaded Neck
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 8 mL |
| External Dimensions | 12.5 × 12.5 × 80 mm |
| Body Height | 80 mm |
| Overall Height with Closure | 100 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Port Thread | M12 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Single Threaded Neck |
| Closure Thread | M12 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC074 when your method uses a 10 mm transmission path and you want a larger nominal fill volume in a capped quartz cell. The M12 screw-top opening gives direct access for filling and emptying, then closes the sample chamber for handling between preparation and measurement. This format is useful when you prefer a covered cell but do not need side optical access.
What makes this option different
- 10 mm optical path suits methods written around a standard 1 cm transmission length.
- 8000 µL nominal capacity supports applications that use a larger filled sample volume than micro-volume cells.
- Two-Way Light configuration is intended for transmission measurements through one defined optical direction.
- Single threaded neck with M12 screw cap provides top access for filling and capped handling during routine use.
- Molded 83 fabrication is often chosen where organic-solvent methods or heated measurement conditions may be part of the workflow, subject to the full assembly and chemical conditions.
- 12.5 × 12.5 mm bare optical body with 100 mm overall height including cap lets you check holder fit and top clearance separately.
Using this cell
Fill the cell so the liquid covers the illuminated region used by your instrument, then fit the accompanying closure before measurement. Keep the same orientation for blank and sample if your method depends on consistent positioning, and remove bubbles or exterior droplets before placing the cell in the holder.
Handle the cuvette by non-optical surfaces where possible. Clean optical faces matter more than the nominal capacity, so avoid fingerprints, dried residue and scratches on the transmission faces.
First-use check
- Inspect the optical faces, threaded neck and sample chamber for chips, dust or residue.
- Check that the cuvette seats correctly in your holder and that there is enough clearance above it to fit and remove the cap.
- Run a blank in the same orientation you plan to use for the sample.
Fit and optical alignment
View the English selection reference.
The stated 12.5 × 12.5 × 80 mm dimensions apply to the bare optical body. The full height with the cap fitted is 100 mm, so enclosed sample compartments and holders with limited clearance above the cell should be checked against the assembled height, not the body alone.
Z Height is not established for this SKU. If your instrument uses a fixed beam-height geometry, check the beam position against the actual sample region before ordering.

Solvents and cleaning
Molded 83 is the fabrication type for this cuvette. In practice, this style is often selected for methods involving organic solvents or heated measurement conditions, but suitability still depends on the complete assembly, including the closure, and on your actual chemical conditions.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Screw-Top Cuvette and 1 accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving path length, sample volume, body dimensions, closure details, optical windows, Z Height and fabrication requirements. Send your drawing or holder details, sample conditions and required quantity for review.
Send a product-selection enquiry with SKU MQQSC074 if you need a modified version.
Design notes for this configuration: Tall 10 mm Quartz Cuvette: Checking Height and Handling Space (MQQSC074)
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.












Reviews
There are no reviews yet.