Quartz 10mm Fluorescence Micro Cuvette, 700ul, Four-Way Light, Closure Included, 1pc/ea, C104CR10

Weight	30 g

SKU: C104CR10

C104CR10 Quartz 10mm Four-Way Light Fluorescence Cuvette 700 µl Closure Included

Original price was: $138.00.Current price is: $125.00.

In Stock

Quartz micro cuvette with a 10 mm primary path, 2 mm secondary path and Four-Way Light layout for fluorescence methods that use this geometry. The open-top body has a 700 µL nominal volume, a 2 mm sample-region width and an included closure. Sold as 1 cuvette per price unit.

In Stock

SKU: C104CR10 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CR10 is a quartz micro cuvette for methods that use a 10 mm primary path, a 2 mm secondary path and four-side optical access around the sample region. Its open-top format allows direct filling, and the 700 µL nominal volume keeps the cell in a micro-cuvette size rather than a full-volume square body. An included closure completes the listed sale item, which is sold as 1 cuvette per price unit.

Choose this option

Choose this cell when your procedure calls for the stated 10 mm / 2 mm path arrangement and you want direct top access for loading the sample. The Four-Way Light layout is useful where side optical access matters, while the 2 mm sample-region width helps define the narrow sample zone used by this format.

What makes this option different

10 mm primary path with a 2 mm secondary path for this specific dual-path measurement layout.
Four-Way Light configuration with optical access from four vertical sides.
Open-top body for direct filling, with a closure included in the sale item.
700 µL nominal volume and 2 mm sample-region width in a micro-cuvette format.

Using this cell

Fill from the top until the liquid covers the measurement region required by your method, then remove bubbles before measurement. Keep the same measurement direction and seating orientation for blank and sample runs when your procedure depends on the stated path arrangement.

The 700 µL figure is nominal capacity, not a stated minimum working volume. If you intend to work below nominal fill, verify that the filled height still covers the beam area used by your instrument.

First-use check

Inspect the optical faces and chamber opening for dust or handling marks.
Rinse with a sample-compatible liquid before first use.
Seat the cell in the holder and check that the intended beam region is fully covered when filled.
Run a blank before measuring important samples.

Fit and optical alignment

This cuvette is described as an open-top micro cell with Four-Way Light access, but a customer-fit exterior size is not established here. If your holder has tight body clearance or your instrument uses a fixed beam center, ask us to review fit details before ordering.

Z Height is not specified for this SKU. Four-Way Light describes the general access layout, but it does not by itself establish beam-center match for a particular fluorescence instrument or holder.

Solvents and cleaning

This option uses a powder-fused construction as stated for the selected SKU. Chemical limits for the complete assembled cell are not listed here, so check your sample and cleaning conditions against the full assembly, including concentration, temperature and contact time, before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

Sold as 1 cuvette per MQ sale. A closure is included with this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For a different design, send a drawing or describe the change you need. Custom quartz enquiries are assessed separately from this listed specification, with feasibility, quantity, price and timing confirmed in the project quotation.