(C104SR11) Quartz Micro Cuvette, 10 mm Path, 700 µL

Weight	30 g

SKU: C104SR11

Original price was: $293.00.Current price is: $264.00.

In Stock

C104SR11 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and a 2 mm sample-region channel. Its 700 µL nominal capacity keeps the cell compact while providing a defined narrow measurement section. Supplied as 1 cuvette, with a closure included.

In Stock

SKU: C104SR11 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SR11 is a JGS1 quartz micro cuvette for fluorescence spectroscopy when you need a standard 10 mm path in a compact covered cell. It combines Four-Way Light access with a 2 mm sample-region channel and a 700 µL nominal capacity, giving you a small square-body format with side optical access for fluorescence work. A closure is included for covered sample handling.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Detection Channel Width	2 mm

Choose this option

Choose C104SR11 when your setup needs a 10 mm optical path but you also want a defined narrow sample section within a compact 12.5 × 12.5 mm footprint. The 700 µL nominal capacity keeps this option in a micro-cuvette format, and the covered top is useful when the sample should stay contained during filling, transfer and placement in the holder.

What makes this option different

10 mm optical path: standard stated path length in a compact micro cuvette.
2 mm sample-region channel: a narrower measurement section within the cell geometry.
Four-Way Light configuration: side optical access supports fluorescence measurement layouts.
700 µL nominal capacity: compact covered format supplied as 1 cuvette per price unit.

Using this cell

Fill the cell so the intended measurement region is fully covered during use. The 700 µL figure is the nominal capacity, not a minimum working volume, so your actual fill level should be set by your beam position, sample behavior and the way the cell is oriented in your instrument.

Keep the optical faces clean and dry on the outside, and avoid bubbles in the sample region. For routine fluorescence measurements, use the same orientation and seating position for sample and blank so the illuminated section remains consistent from run to run.

First-use check

Before first use, inspect the optical faces for dust, marks or packing residue, rinse with a method-appropriate liquid, and check that the cell seats squarely in the holder. Run a blank at your measurement wavelength and verify that your chosen fill level covers the beam path without trapped bubbles.

Fit and optical alignment

The base footprint is 12.5 × 12.5 mm, with an external size of 12.5 × 12.5 × 45 mm. That helps with holder planning, but the 2 mm channel is part of the sample-region geometry rather than an instrument setting.

Z Height is not specified for this SKU. If beam height is critical in your instrument, check the actual optical axis against your holder and the intended sample zone before ordering rather than assuming a standard beam-center position.

Solvents and cleaning

This cuvette is quartz with an integrated fused construction described by the source, but a released MQ fabrication classification is not established here. For background on MQ fabrication categories, see the fabrication guide.

Chemical compatibility for the complete assembly is not established here, so if your method involves aggressive reagents, prolonged exposure or cleaning solvents, please check the exact liquid and conditions before use. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning methods.

Included with this option

Price is for 1 cuvette. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and related geometry. Send a dimensioned drawing or labelled sketch, along with your holder or instrument details, application wavelength, sample conditions and target quantity. Discuss your requirements and mention part number C104SR11.