(C102CD4) Quartz Ultra-Micro Cuvette, 10 mm Path, 100 µL

Weight	30 g

SKU: C102CD4

Original price was: $142.00.Current price is: $128.00.

In Stock

C102CD4 is a JGS1 quartz ultra-micro cuvette for UV/Vis work, combining a 10 mm optical path with 100 µL nominal capacity and a 15 mm Z Height. Its stopper-equipped format keeps the top covered during routine handling while preserving a compact body for holder planning. Sold as 1 cuvette, with closure included.

In Stock

SKU: C102CD4 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CD4 is a JGS1 quartz Ultra-Micro Cuvette for UV/Vis spectroscopy with a 10 mm optical path, 100 µL nominal capacity and a 15 mm Z Height. It is useful when you need a standard 10 mm measurement path in a small-volume format and want a stopper-equipped top for routine handling. The compact body also helps when you are matching beam height and holder space together.

Path Length: 10 mm
Sample Volume (Nominal): 100 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Z Height	15 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	100 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Standard 80

Choose this option

Choose C102CD4 when your method is built around a 10 mm UV/Vis path but your sample amount fits a 100 µL nominal ultra-micro cell better than a larger cuvette. The 15 mm Z Height is an important fit point for base-referenced beam alignment, and the included closure suits workflows where you want the sample covered at the top during normal bench use.

What makes this option different

10 mm optical path for UV/Vis methods that are set up around this common path length.
100 µL nominal capacity in an ultra-micro format for small-sample measurements without moving to a shorter path cell.
15 mm Z Height from the base to the optical centre for holder and beam-position matching.
Two-Way Light configuration for the defined transmission path used in routine UV/Vis measurement.
Stopper-equipped format with closure included for top-covered sample handling.
Standard 80 adhesive-bonded construction for room-temperature water-based sample and buffer use.

Using this cell

Fill the cell so the illuminated region is fully covered before measurement. The 100 µL figure is the nominal capacity of the cell, not a minimum working volume, so your actual fill level should be set by beam coverage and stable handling in your own setup.

Insert the closure gently and keep the top contact area clean. The stopper-equipped design is useful for routine covered handling of small liquid volumes, but it should not be treated as a pressure rating or as proof for inversion, transport or other closed-system use without checking your own conditions.

First-use check

Inspect the optical faces and top opening for dust, residue or handling marks.
Place the empty cell in your holder and check seating and top clearance.
Fill with blank solution first and confirm that the beam region is fully covered.
Insert the closure gently and make sure your normal handling does not disturb the fill condition.

Fit and optical alignment

The body format is 12.5 × 12.5 × 45 mm for the bare cell body. That 45 mm height does not include the full projecting clearance of the closure, so if your holder area has limited vertical space, leave room above the neck as well as around the body.

The optical centre is 15 mm above the base. Match that base-to-beam reference to your instrument, and confirm that the beam passes through the intended liquid-filled region rather than near the upper meniscus.

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is a practical choice for room-temperature water-based samples and buffers. Avoid organic samples and organic cleaning solvents with this assembled cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean with a suitable non-abrasive laboratory procedure, and wipe the outside optical faces gently with optical tissue.

Included with this option

One C102CD4 ultra-micro cuvette with closure included. The selected sales listing shows the sale unit; if you need a specific delivered quantity for planning or validation, please confirm it before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch together with your instrument or holder information, sample conditions and target quantity. Discuss your requirements and quote part number C102CD4.