(C032WS3) Quartz Large-Window Cuvette, 3 mm Path, 3 mL

Weight	30 g

SKU: C032WS3

Original price was: $123.00.Current price is: $111.00.

In Stock

C032WS3 is a JGS1 quartz large-window cuvette with a 3 mm optical path, Two-Way Light transmission layout and 3 mL nominal capacity. Its open-top body gives direct top access for filling, rinsing and visual sample checks, and the broad 32.5 × 5.5 mm body format suits setups built around a wide optical face. Supplied as 1 cuvette per sale unit.

In Stock

SKU: C032WS3 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C032WS3 is a JGS1 quartz large-window cuvette for UV/Vis work across 200–2500 nm. It combines a 3 mm optical path with a 3 mL nominal capacity and an open-top body, so you can fill and rinse it directly from above while using a broad optical face rather than a narrow standard-body shape.

This option is useful when both the sample region and the outer body geometry matter to your setup. The 32.5 × 5.5 mm body section and 45 mm body height make it a practical choice for holders and beam layouts designed around a wide rectangular cell body.

Path Length: 3 mm
Sample Volume (Nominal): 3 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	3 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3 mL
External Dimensions	32.5 × 5.5 × 45 mm
Body Height	45 mm
Base Dimensions	32.5 × 5.5 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top

Choose this option

Choose C032WS3 when you need a 3 mm transmission path in a quartz cell with direct top access and a broad large-window body. The 3 mL nominal capacity supports routine top filling for bench measurements, and the open-top format keeps the sample region easy to reach for loading, emptying and rinsing between runs.

What makes this option different

Open-top sample access lets you pipette, empty and rinse from above without working through a cap, port or cover assembly.
Large-window body geometry uses a broad 32.5 × 5.5 mm section, which matters when your holder and beam layout are designed around a wide optical face.
3 mm optical path with 3 mL nominal capacity combines a short transmission distance with a sample region sized for routine top-filled measurements.
Two-Way Light layout is arranged for transmission measurement through the defined path, rather than side-access optical geometries.
Fused integrated construction is the supplier’s construction term for this cell, making it a fixed open-top cuvette body rather than a demountable plate assembly that you take apart for loading or cleaning.
JGS1 quartz body supports the stated 200–2500 nm UV/Vis range in this exact cuvette format.

Using this cell

Fill the cell from the top, then check that the liquid sits correctly in the optical region before measurement. The 3 mL nominal capacity and broad body format make this a straightforward bench cell for routine pipetting, draining and rinse-through cleaning from above.

Because this is an open-top cuvette, it is best used where direct access to the sample is more important than a closed or connected assembly. It is not described here as a sealed, pressure-rated or flow-cell design.

First-use check

Inspect the cell for shipping damage and make sure the optical faces are clean.
Test the fit in your holder before preparing valuable samples.
Confirm that the beam passes through the intended window area without clipping.
Run a suitable blank or reference before first sample use.

Fit and optical alignment

Check your holder against the 32.5 × 5.5 mm body section and 45 mm body height. This large-window format does not fit every holder that accepts a narrower standard cuvette body.

The optical path is 3 mm and the light configuration is Two-Way Light for transmission through the intended faces. Z Height is not specified here, so instruments with a fixed beam-height requirement should be checked before ordering.

Solvents and cleaning

This quartz cell is intended for UV/Vis use, but the chemical limits for this exact assembly are not specified in the current product data. If your sample or cleaning routine involves aggressive chemicals, prolonged contact, elevated temperature or unusual solvent systems, check suitability before ordering.

The supplier describes this construction as fused integrated, so handling is that of a fixed one-piece-style open-top cell body rather than a cuvette you disassemble for cleaning. See Compare fabrication options for general construction guidance. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, and tolerance requirements. Send a dimensioned drawing or labelled sketch together with holder or instrument details, critical dimensions, sample conditions and target quantity. Prototype batches typically involve 2–4 cells, with final feasibility, price and production time confirmed for the project. Discuss your requirements.