(C032CR6) Quartz Large-Window Cuvette, 3 mm Path, 1.5 mL

Weight	30 g

SKU: C032CR6

Original price was: $109.00.Current price is: $99.00.

In Stock

C032CR6 is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy, with a 3 mm optical path, Two-Way Light layout and 1.5 mL nominal capacity. Its open-top body gives direct access to the sample chamber in a compact 30 mm-high format. Sold per 1 cuvette.

In Stock

SKU: C032CR6 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C032CR6 combines a 3 mm optical path with a 1.5 mL nominal capacity in a JGS1 quartz large-window cuvette for UV/Vis spectroscopy. It is a useful option when you want a short transmission path together with an open sample chamber that is easy to fill, rinse and inspect from above.

The body stays relatively compact at 26.5 × 5.5 × 30 mm uncapped, while the internal chamber extends to 22.5 × 3 × 28 mm. That combination can be helpful when you need direct top access and a little more sample-region length than a lower-capacity compact body with the same path length.

Path Length: 3 mm
Sample Volume (Nominal): 1.5 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	3 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.5 mL
External Dimensions	26.5 × 5.5 × 30 mm
Uncapped Cell Dimensions	26.5 × 5.5 × 30 mm
Overall Height without Closure	30 mm
External Dimensions Scope	Uncapped Cell
Body Height	30 mm
Internal Dimensions	22.5 × 3 × 28 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C032CR6 when your method needs a 3 mm path and you want an open-top quartz cell with more nominal capacity than a very compact chamber provides. The 1.5 mL nominal volume and direct chamber access suit manual loading and rinsing routines, while the Two-Way Light layout keeps selection straightforward for transmission measurements.

What makes this option different

3 mm optical path for UV/Vis methods built around this transmission distance.
1.5 mL nominal capacity in a compact large-window chamber.
Open-top body for direct pipetting, rinsing and visual inspection from above.
26.5 × 5.5 × 30 mm uncapped size for checking holder clearance and surrounding space.

Using this cell

Fill from the open top and make sure the sample level covers the beam position used by your instrument. Keep the outer optical faces free from droplets, fingerprints and residue, and remove visible bubbles before measurement.

The stated 1.5 mL is a nominal capacity, not a minimum working volume. If your method is sensitive to fill height or beam position, check that the filled sample region fully covers the optical path used by your instrument.

First-use check

Inspect the cell for chips, dust or residue on the optical faces.
Rinse the chamber with a solvent suitable for your method.
Test fit the body in your holder before preparing valuable samples.
Run a blank and confirm that the filled sample region covers the beam position.

Fit and optical alignment

This is a Two-Way Light cuvette with transmission through two opposed optical faces. The uncapped external dimensions are 26.5 × 5.5 × 30 mm, and the internal dimensions are 22.5 × 3 × 28 mm, which are the dimensions to compare with your holder opening and nearby fixture space.

Z Height is not specified for this SKU. If your holder uses a fixed beam-center position, please confirm that requirement before ordering rather than assuming fit from path length or overall body height alone.

Solvents and cleaning

This cuvette uses JGS1 quartz for UV/Vis work over the stated 200–2500 nm range. The exact chemical limits for this assembled SKU are not specified here, so if your application involves aggressive chemicals, extended soaking or demanding cleaning conditions, please check suitability before routine use.

For general fabrication guidance, see Compare fabrication options. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, openings, holder fit and related requirements. Send a dimensioned drawing or labelled sketch together with your holder details, wavelength range, sample conditions and target quantity. Discuss your requirements and reference C032CR6.