(MQQMC036) JGS1 Quartz Micro Cuvette, 6 mm Path, 1.2 mL

Weight	50 g

SKU: MQQMC036

$161.00

In Stock

Open-top JGS1 quartz micro cuvette with a 6 mm optical path, 6 × 6 mm internal cross-section and 1.2 mL nominal capacity. Four optical faces provide transmission access and adjacent optical access for a compatible fluorescence arrangement. The body is 12.5 × 12.5 × 45 mm; supplied as one cell.

In Stock

SKU: MQQMC036 Categories: Cuvettes, Products, Quartz Micro Cuvettes Tags: 1.2 mL capacity, 6 mm path length, Cuvettes, Four-Way Light, quartz fluorescence cuvette

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC036 is the 6 mm-path option in this four-face JGS1 quartz micro-cuvette series. Its 6 × 6 mm internal cross-section and 1.2 mL nominal capacity sit within a 12.5 × 12.5 × 45 mm body. Direct top access makes it straightforward to fill, inspect and rinse the chamber.

Path Length: 6 mm
Sample Volume (Nominal): 1.2 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy; Fluorescence Spectroscopy
Path Length	6 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	1.2 mL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Internal Cross-Section Side Lengths	A: 6 mm; B: 6 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top
Pack Quantity	1 Piece

Choose this option

Choose the 6 mm version when your method calls for this optical path and a 6 × 6 mm internal cross-section. At 1.2 mL, it has the largest stated nominal capacity among the 4, 5 and 6 mm options compared here, while retaining the same outer body format.

What makes this option different

6 mm optical path: select this version for the measurement path specified by your method.
6 × 6 mm internal cross-section: this describes the sample region across the chamber; compare it with the beam footprint separately from the external holder dimensions.
Four optical faces: opposing faces provide transmission access, while adjacent faces can support a suitable fluorescence excitation and collection arrangement.
1.2 mL nominal capacity: plan the working fill around complete coverage of the illuminated region, keeping blank and sample at a consistent fill condition.
Open top: load directly with a pipette and inspect for bubbles before positioning the cell in the holder.

Using this cell

Introduce the sample through the open top and inspect the 6 × 6 mm sample region for bubbles or residue. Keep the same seating and orientation for blank and sample. For fluorescence, align the excitation and collection directions with the appropriate adjacent optical faces and verify the arrangement with a suitable blank.

Nominal capacity is not a minimum working-volume specification. Establish a fill that fully covers the beam at the actual measurement position, then use the same procedure for the blank and sample.

First-use check

Inspect the rim, body and optical faces for damage, dust or residue.
Seat the cell in the holder and check beam access with a suitable blank.
Confirm full beam coverage, clear bubbles and repeatable positioning before measuring the sample.

Fit and optical alignment

The 12.5 × 12.5 mm outer footprint and 45 mm body height determine holder clearance. The 6 × 6 mm internal cross-section is a separate check for the beam footprint and illuminated sample region. Leave room above the open top for filling without contacting the optical walls.

Z Height is not specified for this option. Check beam-centre alignment in the actual holder before selecting the working fill.

View the English selection reference.

Solvents and cleaning

This series uses fused-integrated JGS1 quartz construction. Select sample and cleaning conditions for the complete cell and your actual chemical, concentration, temperature and contact time. For construction choices, see the fabrication guide. Contact us to review conditions that are critical to your method.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis, abrasive cleaning and sudden temperature changes. Rinse away sample residue and clean exterior optical faces gently with non-abrasive optical tissue.

Included with this option

One MQQMC036 JGS1 quartz micro cuvette. The price is per cell.

Availability and ordering

Contact us to confirm current availability and dispatch timing for your quantity. For a required delivery date, check timing before checkout; preparation and production are separate from carrier transit and customs clearance.

Discuss a custom version

For a different path, sample region, optical layout, body geometry or closure, send a drawing or labelled sketch, holder and beam details, sample conditions and required quantity. Material, construction, feasibility and any prototype batch are confirmed for the quoted project. Contact us and include MQQMC036.