(MQQMC028) Black-Wall JGS1 Quartz Ultra-Micro Cuvette, 10 mm Path, 50 µL, Z Height 15 mm

Weight	150 g

SKU: MQQMC028

Product dimensions for checking holder clearance and sample access.

Black-Wall JGS1 Quartz Ultra-Micro Cuvette, 10 mm Path, 50 µL, Z Height 15 mm

$96.00

In Stock

Black-wall JGS1 quartz ultra-micro cuvette for UV/Vis work with a 10 mm optical path, 50 µL nominal capacity and 15 mm Z Height. The open-top, Two-Way Light format gives direct pipette access while helping you match a defined beam-center height in small-volume measurements. Sold as 1 piece.

In Stock

SKU: MQQMC028 Categories: Cuvettes, Products, Quartz Micro Cuvettes Tags: 10 mm path length, 50 uL sample volume, Black-wall quartz ultra-micro cuvette, Cuvettes, Two-Way Light

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC028 is a black-wall JGS1 quartz Ultra-Micro Cuvette for UV/Vis measurements with a 10 mm optical path, 50 µL nominal capacity and 15 mm Z Height. It is a practical choice when you need a small sample volume but still have to place the beam at a defined height in the holder. The open-top format keeps filling and visual sample checks straightforward during routine use.

Path Length: 10 mm
Sample Volume (Nominal): 50 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Z Height	15 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	50 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Fabrication Method	Standard 80
Opening Configuration	Open Top
Pack Quantity	1 Piece

Choose this option

Choose this cuvette when your method calls for a 10 mm path in an ultra-micro format and your setup is arranged around a 15 mm beam-center height. The 50 µL nominal capacity suits small-sample handling, while the black-wall, Two-Way Light layout keeps measurement to the intended optical direction rather than relying on side access from multiple faces.

What makes this option different

Open Top access leaves the sample area directly reachable for pipetting, blank filling and rinsing.
50 µL nominal capacity supports small-volume work without changing to a shorter 10 mm optical path.
15 mm Z Height helps you match the optical center to holders and beam positions built around that height.
Two-Way Light configuration is intended for transmission through the defined measurement faces used in UV/Vis work.
Standard 80 adhesive-bonded construction is better suited to routine room-temperature aqueous samples and buffers than to organic sample or cleaning systems.

Structure and dimensions

Using this cell

Fill from the top with a suitable pipette and make sure the liquid covers the measurement region before taking a reading. In this ultra-micro format, careful filling matters because the sample space is small and trapped bubbles can obstruct the beam.

Keep the same orientation for blank and sample measurements. After filling, check the optical faces for exterior droplets and wipe them gently before placing the cell in the beam.

First-use check

Inspect the rim and optical faces for chips, residue or visible contamination.
Run a blank to confirm beam alignment and liquid coverage in your holder.
Check for bubbles after filling and wipe the exterior optical faces gently before measurement.

Fit and optical alignment

The body dimensions are 12.5 × 12.5 × 45 mm, and these dimensions apply to the cell body only. Check the outer envelope against your holder and surrounding clearance, especially if access from above is limited during filling.

The 15 mm Z Height identifies the beam-center position from the base to the optical-window center. This is the key alignment value for holder matching, but it does not by itself confirm full instrument fit, beam footprint coverage or compatibility with every 10 mm holder.

View the English selection reference.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded quartz construction. For this fabrication, routine room-temperature aqueous samples and buffers are the safer selection direction.

Avoid organic samples and organic cleaning solvents with this bonded cell. Keep hydrofluoric acid away from quartz, and avoid hot strong alkalis and abrasive cleaning methods. Chemical limits for this exact assembly are not established here, so check suitability before use if your sample or cleaning process involves more aggressive chemicals.

Included with this option

1 cuvette. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, nominal volume, outer size, Z Height or opening arrangement, send your holder details or a labelled drawing for review. MQ custom enquiries generally use JGS1 quartz, with feasibility, quantity, price and production time confirmed for the project.

Send a product-selection enquiry with SKU MQQMC028 and your holder or application details.