(MQQMC052) Quartz Micro Cuvette, 30 mm path, Black Walls with 2 mm Slit
$149.00
MQQMC052 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 30 mm optical path, Two-Way Light geometry and black walls with a 2 mm slit. Its open-top body and 2.0 mL nominal capacity suit methods that need a defined long-path micro cell rather than a general square cuvette. Sold as 1 piece.
Description
MQQMC052 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy, built around a 30 mm optical path in a compact open-top body. The black-wall construction and stated 2 mm slit focus attention on the illuminated sample region, while the 2.0 mL nominal capacity gives a practical long-path micro format. This option is supplied as one cuvette.
- Path Length
- 30 mm
- Sample Volume (Nominal)
- 2 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 30 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 2 mL |
| External Dimensions | 32.5 × 12.5 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 32.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Micro Cuvette |
Choose this option
Choose MQQMC052 when your method needs a long 30 mm transmission path in a micro cuvette format and the stated 2 mm slit matches how you plan to illuminate the sample. The open top makes filling and rinsing straightforward, and the black-wall body is useful when you want this specific optical layout rather than a plain clear-body cell.
What makes this option different
- 30 mm optical path for methods built around a longer transmission path in a compact cell.
- Black walls with a 2 mm slit to define the exposed sample region and help you match beam footprint to the cell geometry.
- Open-top access for direct pipetting, inspection and rinsing.
- Two-Way Light layout for transmission through two opposite optical faces.
Structure and dimensions

Using this cell
Fill from the top and make sure the sample fully covers the illuminated region before measurement. Remove bubbles and wipe away exterior droplets, especially around the optical faces, so the beam passes through a clean, continuous liquid column.
Keep the same orientation for blank and sample runs. The 2.0 mL figure is the nominal capacity of the cuvette, not a minimum working volume, so lower fill methods should be checked on your own setup to confirm beam coverage.
First-use check
- Inspect the optical faces and slit region for chips, residue or dust.
- Rinse with a suitable neutral cleaning liquid and dry the outer optical faces gently.
- Run a blank in the intended orientation to confirm seating and beam coverage.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The body dimensions are 32.5 × 12.5 × 45 mm for the bare cuvette body. Check holder clearance and beam placement before ordering, especially if your mount controls beam height tightly or uses a narrow aperture around the sample region.
Z Height is not stated for this model. If your instrument depends on a defined beam-center height, please check that detail against your holder before ordering.

Solvents and cleaning
This cuvette uses Standard 80 adhesive-bonded construction. For this model, the stated usage direction is neutral solutions only.
Avoid organic samples and organic cleaning solvents with this cell. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis or abrasive cleaning materials that can damage the optical surfaces or bonded assembly.
Included with this option
1 Quartz Micro Cuvette. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your application.
Prototype batches typically involve 2–4 cells; final feasibility, specifications, quantity, price and production time are confirmed in quotation. Send a product-selection enquiry with SKU MQQMC052, your holder details, sample conditions and required quantity.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.