(MQQMC067) Glass Micro Cuvette, 10 mm Path, 1.4 mL, Four-Way Light
Description
MQQMC067 is a glass Micro Cuvette for visible-light methods that need a 10 mm path in a smaller-format cell. This version combines a 4 mm slit, Four-Way Light access and a 1.4 mL nominal capacity, which makes it useful when you want side optical access and a defined narrow sample region. It is intended for visible spectroscopy and visible-light fluorescence, and this listing is for 1 cell with caps and protective packaging.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.4 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | Visible Spectroscopy; Visible-Light Fluorescence |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 350 nm |
| Wavelength Range — Upper Limit | 2000 nm |
| Sample Volume (Nominal) | 1.4 mL |
| Material | Glass |
| Closure Type | Lid |
| Closure Included | Yes |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Glass micro cuvette; Caps and protective packaging |
Choose this option
Choose this cell when your method uses a 10 mm path but your setup is better suited to a micro-format sample chamber than a full-size cuvette. The 4 mm slit helps identify this version within the series, while the Four-Way Light layout supports measurement arrangements that use optical access from more than two faces.
What makes this option different
- 10 mm optical path: keeps the standard 1 cm path used in many visible-light methods.
- 4 mm slit: defines this option’s narrower sample region within the series.
- Four-Way Light: provides optical access from four sides for compatible visible-light fluorescence and observation layouts.
- 1.4 mL nominal capacity: gives the stated chamber volume for this micro cuvette format.
Structure and dimensions

Using this cell
Fill the cell from the open top and make sure the liquid level covers the illuminated region before measurement. For absorbance work, keep the same orientation for blank and sample so the 10 mm path is used consistently.
The 1.4 mL figure is the nominal capacity, not a stated minimum working volume. Before reading, remove bubbles and keep the outside optical faces clean and dry.
First-use check
- Inspect the optical faces, slit area and rim after unpacking.
- Rinse with a suitable neutral solution and check that the cell seats squarely in the holder.
- Run a blank and confirm that the beam passes through a fully filled, bubble-free region.
Fit and optical alignment
View the English selection reference for this slit, path and pack option.
Check the holder opening, beam footprint and beam height before ordering. The 4 mm slit helps distinguish the sample region, but Z Height is not established for this SKU, so instrument fit should be checked from the holder side rather than assumed.
If your holder geometry is critical, please use the contact page and include the instrument or holder details.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded construction. It is best suited to routine room-temperature aqueous work with neutral solutions.
Avoid organic samples and organic cleaning solvents with this cell. Keep hydrofluoric acid away from glass, avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive optical tissue.
Included with this option
1 glass micro cuvette, caps and protective packaging. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need another geometry or a JGS1 quartz version for a different wavelength range, send your drawing or labelled sketch together with the required path length, capacity, holder details, beam information and any critical dimensions. Prototype batches for custom JGS1 quartz projects typically involve 2-4 cells, with feasibility, final specifications, price and production time confirmed in quotation.
Send a product-selection enquiry with SKU MQQMC067 and your application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.