Site Navigation

(MQQMC065) Glass Micro Cuvette, 10 mm Path, 1.05 mL, Four-Way Light

Weight50 g
SKU: MQQMC065

$65.00

In Stock

Glass micro cuvette for visible spectroscopy and visible-light fluorescence, with a 10 mm optical path, Four-Way Light access and 1.05 mL nominal capacity. The open-top format is supplied with a cap and intended for neutral solutions. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC065 pairs a standard 10 mm optical path with a 1.05 mL nominal capacity in a glass micro cuvette for visible spectroscopy and visible-light fluorescence. The Four-Way Light layout gives side optical access around the sample, while the open top allows direct filling and rinsing during routine lab work. This option is intended for neutral solutions and is sold as one cell with cap and protective packaging.

Path Length
10 mm
Sample Volume (Nominal)
1.05 mL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeMicro Cuvette
Measurement ModeVisible Spectroscopy; Visible-Light Fluorescence
Path Length10 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit350 nm
Wavelength Range — Upper Limit2000 nm
Sample Volume (Nominal)1.05 mL
MaterialGlass
Closure TypeLid
Closure IncludedYes
Fabrication MethodStandard 80
Opening ConfigurationOpen Top
Pack Quantity1 Piece
Package Contents1 × Glass micro cuvette; Caps and protective packaging

Choose this option

Choose MQQMC065 when you want a visible-light micro cuvette with the familiar 10 mm path but more nominal fill capacity than the smaller versions in this family. It is useful when your method benefits from side optical access and you prefer an open-top cell for direct pipetting, blanking and cleaning between measurements.

What makes this option different

  • 10 mm path length: fits methods based on the standard 1 cm optical path.
  • 1.05 mL nominal capacity: provides more nominal sample volume within the same micro-cuvette format.
  • Four-Way Light configuration: adds side optical access for suitable visible-light fluorescence layouts.
  • Single-piece sale unit: this listing is for one physical cuvette with cap.

Using this cell

Fill from the open top and make sure the sample level covers the illuminated region used by your instrument. Keep the cell orientation consistent between blank and sample so the same optical faces are used throughout the run.

The 1.05 mL figure is a nominal capacity rather than a minimum working volume. Before measurement, remove visible bubbles and keep the outside optical faces clean and dry.

First-use check

  1. Inspect the body, rim and optical faces for chips, residue or handling marks.
  2. Rinse with a suitable compatible liquid and run a blank at the working wavelength.
  3. After filling, confirm that the beam region is covered and free of visible bubbles.

Fit and optical alignment

View the English selection reference for this option.

Check your holder opening, insertion depth, beam height and beam footprint before ordering. A Z Height is not established for this SKU, so compatibility should be checked from your actual holder and beam geometry rather than assumed from path length or nominal volume alone.

English selection reference
Selection reference ↗

Solvents and cleaning

This is a Standard 80 adhesive-bonded glass cell. For this option, use is restricted to neutral solutions. Avoid organic samples, organic cleaning solvents, aggressive reagents and heated cleaning procedures.

Keep hydrofluoric acid away from glass. Avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive laboratory tissue or another suitable soft material.

Included with this option

1 glass micro cuvette, caps and protective packaging. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different material or geometry, we can discuss a separate custom JGS1 quartz project. Send your holder details, required path length, sample volume, beam information, closure needs and any critical dimensions or tolerances through the contact page.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQMC065) Glass Micro Cuvette, 10 mm Path, 1.05 mL, Four-Way Light”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare