(MQQHC001) 33 mL Quartz Sample Cell, Front and Bottom Windows, 50 × 30 × 30 mm
$173.00
Open-top JGS1 quartz sample cell with 33 mL nominal capacity and optical windows on the adjacent front and bottom faces. The 50 × 30 × 30 mm body has a specified 2 mm wall thickness. Standard 80 adhesive-bonded construction is intended for routine room-temperature water-based samples and buffers; one cell supplied.
Description
MQQHC001 is a JGS1 quartz rectangular sample cell with a 33 mL nominal capacity, an open-top chamber, and optical windows on the front and bottom faces. This layout is useful when your holder or observation arrangement needs access through two neighbouring faces in the same body, while the 50 × 30 × 30 mm format gives a larger sample chamber than small micro cells.
- Sample Volume (Nominal)
- 33 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Light Transmission Configuration | Adjacent Front and Bottom Optical Windows |
| Optical Window Layout | Front; Bottom |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 33 mL |
| External Dimensions | 50 × 30 × 30 mm |
| Body Height | 30 mm |
| Base Dimensions | 50 × 30 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Wall Thickness | 2 mm |
| Package Contents | 1 × Quartz Rectangular Sample Cell |
Choose this option
Choose MQQHC001 when you need a larger open-top quartz cell and your optical setup is arranged around front-and-bottom access. The 33 mL nominal chamber suits higher-volume sample handling, and the open top makes filling, emptying, and rinsing straightforward during routine bench use.
What makes this option different
- 33 mL nominal capacity for larger sample volumes in a rectangular quartz body.
- Adjacent front and bottom optical windows for setups that use two neighbouring optical faces.
- Open-top chamber for direct filling, inspection, and manual cleaning access.
- 50 × 30 × 30 mm body with 2 mm walls for checking holder space, support area, and top access clearance.
Structure and dimensions

Using this cell
Fill the cell from the open top and make sure the liquid level covers the optical region used by your measurement. For repeatable work, keep the same orientation in the holder each time so the front and bottom window positions stay consistent. Plan the beam and any collection geometry around these adjacent faces, leaving the required bottom area clear of the supporting fixture.
Remove bubbles from the window areas before measurement and wipe the outside gently after filling. The nominal capacity describes the chamber volume and should not be treated as a minimum working volume.
First-use check
- Inspect the chamber and the front and bottom window areas for chips, residue, or handling marks.
- Place the cell in the holder with a suitable blank to confirm support and alignment.
- After filling, clear bubbles from the optical regions and wipe the exterior gently.
Fit and optical alignment
View the English selection reference.
The stated body dimensions are 50 × 30 × 30 mm. Check holder clearance, base support, and access to the front and bottom optical faces against your instrument or fixture before ordering.
Z Height is not listed for this cell, so beam position should be checked directly in your holder rather than assumed from the overall body size. The 2 mm wall thickness is a body construction detail. Establish the required optical geometry from the front-and-bottom window arrangement and your fixture.
Solvents and cleaning
This cell uses Standard 80 fabrication, an adhesive-bonded quartz construction commonly chosen for room-temperature water-based samples and buffer solutions. Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean optical areas gently with non-abrasive optical tissue.
Included with this option
1 Quartz Rectangular Sample Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different chamber size, window arrangement, body envelope, or opening style, send your drawing or application details for review.
Send a product-selection enquiry with SKU MQQHC001, your fixture details, sample conditions, and required quantity.
Design notes for this configuration: Quartz Cell with Clear Front and Base: Planning Two Adjacent Viewing Directions
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.