(MQQFC043) Quartz Rectangular Sample Cell, 9/6.2 mm Dual Path, 2.4 mL, Open at Both Ends
Description
MQQFC043 is a JGS1 quartz rectangular sample cell with two defined optical directions, 9 mm and 6.2 mm, in one body. Its Four-Way Light layout allows optical access across both crosswise directions, and the 2.4 mL nominal capacity gives a practical chamber size when you want more volume than a micro-format cell without moving to a larger external envelope. The body is open at both ends, so the installed fixture determines how the sample is held and how the ends are managed.
- Path Length
- 9 mm / 6.2 mm (dual path)
- Sample Volume (Nominal)
- 2.4 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 9 mm / 6.2 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 2.4 mL |
| External Dimensions | 10 × 7.2 × 44 mm |
| Body Height | 44 mm |
| Base Dimensions | 10 × 7.2 mm |
| Internal Dimensions | 9 × 6.2 × 44 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC043 when your method needs two crosswise path options in the same rectangular quartz body and your holder fixes the measurement orientation. It is a good fit for installations where you want one cell body to support either a 9 mm or 6.2 mm path without changing to a different chamber format.
What makes this option different
- 9 mm and 6.2 mm dual paths in one body, with orientation setting the active measurement direction.
- Four-Way Light layout for optical access through both crosswise sides.
- 2.4 mL nominal capacity in a compact rectangular chamber.
- Open at both ends for use with separately designed end support or sealing hardware.
- Molded 83 fabrication for applications that may involve organic-solvent methods or elevated-temperature work, subject to the actual chemical conditions and assembly materials.
Structure and dimensions

Using this cell
Choose the intended optical direction before measurement and keep that orientation the same for blanks and samples. Because both path lengths are built into the same body, consistent mounting is part of obtaining repeatable use of the selected path.
For liquid measurements, the filling method and end retention come from your fixture rather than from the cell alone. This SKU is a cell body only; it does not provide built-in tubing connections or a finished sealed flow path.
First-use check
- Inspect the optical faces, end edges and chamber surfaces after unpacking.
- Confirm which path direction the method will use and record the orientation.
- Check fit, alignment and sample retention with a blank in the real fixture.
Fit and optical alignment
Use the 10 × 7.2 × 44 mm external dimensions to check holder clearance and support points. The internal 9 × 6.2 × 44 mm dimensions describe the chamber shape and the two crosswise path directions, not the outer mounting envelope.
Z Height is not listed for this item, so beam-center matching should be checked in the actual holder rather than inferred from overall height. Avoid concentrated clamping force on the optical faces and support the body evenly along its installed length.

Solvents and cleaning
Molded 83 is often chosen for organic-solvent methods and applications involving heat, but actual suitability still depends on the sample chemistry, concentration, temperature, contact time and the materials used elsewhere in the mounted assembly.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with suitable non-abrasive laboratory wipes, and check that any separate seals or end parts suit the same cleaning procedure.
Included with this option
1 rectangular sample cell, SKU MQQFC043. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects for changes to path length combinations, chamber size, external dimensions, openings and holder-related geometry. Send a drawing or labelled sketch together with beam direction, sample conditions, quantity and any critical fit requirements.
Send a product-selection enquiry with SKU MQQFC043 and your application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.