(MQQFC044) Quartz Rectangular Sample Cell, 7.5/1 mm Dual Path, 375 µL, Open at Both Ends
Description
MQQFC044 is a JGS1 quartz rectangular sample cell built around two crosswise optical paths in the same body: 7.5 mm in one direction and 1 mm in the other. With Four-Way Light access and a 375 µL nominal capacity, it is useful when your setup needs a slim rectangular chamber and a controlled choice between two path directions. The cell body is open at both ends, so it is selected as a component for a holder or assembly rather than as a self-contained flow unit.
- Path Length
- 7.5 mm / 1 mm (dual path)
- Sample Volume (Nominal)
- 375 µL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 7.5 mm / 1 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 375 µL |
| External Dimensions | 12.5 × 6 × 50 mm |
| Body Height | 50 mm |
| Base Dimensions | 12.5 × 6 mm |
| Internal Dimensions | 7.5 × 1 × 50 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC044 when your method needs two specified optical distances in one compact rectangular body and the surrounding fixture controls orientation and end support. The 7.5 mm and 1 mm path directions let you work with the same sample chamber in two crosswise measurement orientations, while the open-ended form leaves filling, retention and any end hardware to your own assembly design.
What makes this option different
- Dual 7.5 mm and 1 mm paths in one cell body for setups that use different crosswise optical directions.
- Four-Way Light geometry for optical access from both crosswise sides of the rectangular chamber.
- Open at both ends, so the installed fixture must provide the practical sample-holding arrangement.
- 375 µL nominal capacity in a narrow 7.5 × 1 × 50 mm internal chamber.
Structure and dimensions

Using this cell
Set the cell in the intended orientation before measurement and keep that orientation consistent for blanks, references and samples. Because the two path directions are different, rotating the body changes the optical distance through the sample.
The open-ended geometry matters during handling. Filling, end support and sample retention depend on the holder or assembled setup used around the cell body, so those parts should be planned together with the measurement direction.
First-use check
- Inspect the optical faces, internal chamber and end edges after unpacking.
- Confirm which installed orientation gives the 7.5 mm path and which gives the 1 mm path.
- Test the fit and sample-holding arrangement in the actual holder before analytical use.
Fit and optical alignment
Use the 12.5 × 6 × 50 mm external dimensions to check holder clearance, and the 7.5 × 1 × 50 mm internal dimensions to understand the chamber shape inside the body. This helps when planning support surfaces, end access and the installed orientation of the light path.
Z Height is not listed for this SKU. If your instrument or holder depends on a defined beam-center height, check that point in the real mounting arrangement before routine use.

Solvents and cleaning
Molded 83 is the listed fabrication grade for this cell. This fabrication is commonly chosen for methods involving organic solvents and for applications that may involve heat, but suitability still depends on the sample liquid, concentration, temperature, contact time and the other materials in the full assembly.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces carefully with suitable non-abrasive laboratory wipes.
Included with this option
1 rectangular sample cell, SKU MQQFC044. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects for different path combinations, chamber sizes, external dimensions, openings or fixture-related geometry. Send a drawing or labelled sketch together with beam direction, sample conditions, quantity and the dimensions that are critical to your installation.
Send a product-selection enquiry with SKU MQQFC044 and your application details.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.