(MQQFC006) Quartz Counting Flow Cell, 0.2 mm path, Three Physical Flow Channels
$600.00
Three-channel JGS1 quartz counting flow cell with a 0.2 mm optical path and six tube connections, arranged as three opposed pairs. Each channel region is specified as 28 × 4 × 0.2 mm; tube OD is 1.6 mm and ID is 1.3 mm. The three liquid channels share one flat mounted body. One cell supplied.
Description
MQQFC006 is a three-channel quartz counting flow cell for flow-counting setups that need several separate liquid paths within one mounted part. This JGS1 quartz cell combines a 0.2 mm optical path with six tube connections, so you can route three individual channels while keeping the body itself to 42 × 31.5 × 4.2 mm.
- Path Length
- 0.2 mm
- Cell Type
- Counting Flow Cell
- Opening Configuration
- Three Channels with Six Tube Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Counting Flow Cell |
| Measurement Mode | Flow Counting |
| Path Length | 0.2 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| External Dimensions | 42 × 31.5 × 4.2 mm |
| Cell Body Dimensions | 42 × 4.2 × 31.5 mm |
| Body Height | 4.2 mm |
| Base Dimensions | 42 × 31.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 6 |
| Tube Outer Diameter (OD) | 1.6 mm |
| Tube Inner Diameter (ID) | 1.3 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Three Channels with Six Tube Connections |
| Port Layout | Upper channel, left end tube as drawn; Upper channel, right end tube as drawn; Middle channel, left end tube as drawn; Middle channel, right end tube as drawn; Lower channel, left end tube as drawn; Lower channel, right end tube as drawn |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC006 when your setup needs three physically separate flow channels rather than one shared chamber. The short 0.2 mm path suits methods built around a very short optical region, and the six tube ends let you connect each channel pair individually for filling, rinsing or line routing.
What makes this option different
- Three physical flow channels in one quartz body, each kept separate from the others.
- Six tube connections so each channel has its own two-end fluid path.
- 0.2 mm optical path for methods designed around a short fixed path length.
- Compact plate-style body at 42 × 31.5 × 4.2 mm, with tubing space planned separately.
Using this cell
Support the cell by the quartz body during installation and connection. Do not use the projecting tubes as handling points. Plan the routing for all three channel pairs before mounting so the connected lines do not pull the cell out of position.
Fill slowly and watch the channel region for trapped bubbles before measurement. The source image identifies upper, middle and lower channel positions as drawn, but it does not assign inlet or outlet roles, so set the flow direction to suit your own circuit layout.
No pressure rating is stated for this cell. If your system is pressurized, review the full fluid path and operating conditions before use.
First-use check
- Inspect the quartz body, optical faces and all six tube ends for damage or residue.
- Test holder fit and tubing routing before introducing sample.
- Run a suitable blank through the installed assembly and check for bubbles or movement at the measurement region.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The stated 42 × 31.5 × 4.2 mm dimensions apply to the cell body. They do not include the extra space needed for the six tube connections, attached tubing or bend radius around the installed cell.
Z Height is not listed for this SKU, so check beam position and holder seating against your instrument or fixture before ordering if your setup has a fixed optical centerline. Use the body dimensions for holder planning, and allow separate clearance for the tubing layout.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is a practical choice for routine room-temperature aqueous samples and buffers.
Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method involves organic solvents or heated cleaning, please contact us to discuss a more suitable Sintered or Molded alternative before ordering.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Flow Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom JGS1 quartz flow-cell requirements involving dimensions, path length, channel layout, connections, fabrication and tolerance requirements. Please send your drawing or holder details, sample conditions, required quantity and delivery destination through our contact page, and mention SKU MQQFC006.
Design notes for this configuration: Three-Channel Quartz Flow Cell: Three Observation Rows in One Plate
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.