(MQQFC131) Quartz Flow Cell, 10 mm Path, 70 µL, 15 mm Z Height
$179.00
JGS1 quartz flow cell with a 10 mm optical path, 70 µL nominal capacity and 15 mm base-to-beam-centre height. A 3 mm optical aperture is separate from the two top fluid tubes, each 3 mm OD / 1.5 mm ID. The body is 45 mm high and the fixed tube-inclusive assembly is 55 mm high. Standard 80; one cell supplied.
Description
MQQFC131 is a compact JGS1 quartz flow cell for UV/Vis measurements with a 10 mm optical path and 70 µL nominal capacity. This version combines a 3 mm optical opening, 15 mm Z Height and fixed two-tube layout, making it a practical choice when optical access, beam height and tubing size all need to fit within a small installed assembly.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 70 µL
- Opening Configuration
- Two Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Z Height | 15 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 70 µL |
| External Dimensions | 12.5 × 12.5 × 55 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Installed Assembly |
| Body Height | 45 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 3 mm |
| Tube Inner Diameter (ID) | 1.5 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Fluid Tubes |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC131 when your setup needs a standard 10 mm flow path but with tighter optical and fluid-handling geometry than a larger general-purpose body. The 3 mm optical opening and 70 µL nominal capacity suit compact installations, while the fixed 3 mm OD / 1.5 mm ID tubes let you judge connection size and routing before you build the rest of the flow path around the cell.
What makes this option different
- 10 mm optical path: gives a standard absorbance path in a compact flow-through format.
- 70 µL nominal capacity: provides a small cell volume without implying a minimum working fill.
- 3 mm optical opening: helps you check beam size and optical access in tighter layouts.
- Fixed 3 mm OD / 1.5 mm ID tubes: useful for planning connection size, tubing transition and overhead clearance.
Using this cell
Support the cell by the body rather than by the tubes during installation. Because the two fluid tubes are fixed, it is best to plan the tubing route before tightening the rest of the liquid path so the quartz assembly is not twisted or used as a handle.
Fill the cell slowly and inspect the optical region for bubbles before blanking. The nominal 70 µL figure refers to the cell itself; the total liquid volume of the connected system will be higher once external tubing and fittings are added.
No pressure rating is listed for this model, so check operating pressure before using it in a pressurized circuit.
First-use check
- Inspect the optical faces, tube ends and body for shipping or handling damage before installation.
- Place the cell in the holder and verify beam alignment at the 15 mm beam centre.
- Fill with a suitable blank, remove visible bubbles and repeat the blank after the liquid path has stabilised.
Fit and optical alignment
The 3 mm opening is the optical aperture. It is separate from the 1.5 mm liquid bore in each top tube. Check beam size and the 15 mm beam-centre height independently from your tubing and adapter fit.
View the English selection reference.
The installed assembly is 12.5 × 12.5 × 55 mm, with a 45 mm body height and a 15 mm Z Height. Compare those dimensions with the holder opening and beam centre in your instrument, then allow extra space for your own attached tubing and bend radius beyond the stated assembly size.
The 3 mm optical opening is also worth checking if your beam or holder aperture is tightly constrained.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is best suited to routine room-temperature aqueous samples and buffers. Avoid organic sample solvents and organic cleaning agents with this construction.
If your method requires organic liquids, ask about a suitable sintered or molded alternative. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 quartz flow cell. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, windows, Z Height, connections, fabrication and tolerances. Send a drawing or labelled sketch together with holder details, sample conditions, the critical dimensions and the required quantity.
Send a product-selection enquiry and include SKU MQQFC131.
Additional information
| Weight | 75 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.