(MQQST012) Quartz Cylindrical Cell, 2 mm path, 4.5 mm Axial Exterior Thickness
$828.00
JGS1 quartz cylindrical cell for UV/Vis spectroscopy with a 2 mm optical path and a stoppered top opening. Its round chamber uses a 50 mm inner diameter within a 57 mm outer body, which helps when your method or holder is designed around cylindrical geometry rather than a rectangular cuvette. Sold as 1 piece with accompanying closure.
Description
MQQST012 is a JGS1 quartz cylindrical cell for UV/Vis spectroscopy with a 2 mm optical path and a stoppered opening. Its broad round chamber and short optical path make it a useful choice when your method requires cylindrical sample geometry, while the stoppered top keeps filling and handling straightforward in routine bench use.
This option is sold as one cell with its accompanying closure. The stated wavelength range of 200–2500 nm supports UV/Vis work, and the overall size information helps you check holder space before you commit to this format.
- Path Length
- 2 mm
- Cell Type
- Cylindrical Cell
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Cylindrical Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 2 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Overall Height without Closure | 66 mm |
| Overall Height with Closure | 69 mm |
| Internal Dimensions | 50 × 2 mm |
| Outer Diameter (OD) | 57 mm |
| Inner Diameter (ID) | 50 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Stopper |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Cylindrical Cell; Accompanying closure |
Choose this option
Choose MQQST012 when you need a cylindrical quartz cell with a short 2 mm optical path and a wide internal sample chamber. The 50 mm inner diameter gives a broad round sample region, while the stoppered top allows direct filling from above. This combination is most useful when your setup, sample presentation or holder is built around a cylindrical cell rather than a rectangular body.
What makes this option different
- 2 mm optical path across the thin sample gap between the circular faces; the 50 mm chamber diameter is a different dimension.
- Broad round sample chamber with 50 mm inner diameter and 57 mm outer diameter.
- Stoppered top opening for direct sample loading and covered use.
- JGS1 quartz, 200–2500 nm for UV/Vis applications across the stated wavelength range.
Using this cell
Fill through the neck and let liquid settle across the thin chamber before seating the stopper gently. The closure covers the opening; it does not establish pressure or leak-tightness performance. For consistent results, use the same orientation for blank and sample measurements and make sure the sample covers the illuminated region used by your method.
Before measurement, check the outside optical area for droplets, fingerprints or residue. If bubbles cling to the inner wall, let the sample settle or refill carefully so the optical path is clear.
First-use check
- Inspect the cell and stopper for chips, residue or visible contamination.
- Place the cell in the holder and verify that it seats securely without interference.
- Run a blank in the same orientation planned for sample measurements.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The circular body is 57 mm in outer diameter and 4.5 mm in axial exterior thickness. Allow 66 mm to the uncapped neck top and 69 mm with the stopper fitted. Check both the thin-disc support and these full heights against the holder and compartment. Beam-center height is not specified for this SKU, so instrument fit should be checked from your actual holder geometry rather than assumed from the overall dimensions alone.
If you are replacing an existing cylindrical cell, compare both the body envelope and the optical direction used in your method. If you are adapting from another cell style, a holder drawing or current cell reference is helpful for review.

Solvents and cleaning
Molded 83 is an MQ fabrication option often chosen for organic-solvent methods and applications involving temperature control. Select the sample and cleaning routine for the complete assembly, including the closure.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical surfaces gently with non-abrasive optical tissue. If your method involves aggressive chemicals, elevated temperature or prolonged contact time, please ask before use.
Included with this option
1 Quartz Cylindrical Cell with accompanying closure. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to cylindrical cell dimensions, optical path length, chamber size, opening style, closure details and fabrication requirements. Send a drawing or labelled sketch together with your holder details, sample conditions, quantity and target date.
Send a product-selection enquiry with SKU MQQST012 if you need a different cylindrical size or holder fit.
We coordinate custom JGS1 quartz production. Prototype batches typically involve 2–4 cells; feasibility, final specifications, quantity, price and production time are confirmed in the project quotation.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.