(MQQSC008) Quartz Screw-Top Cuvette, 3 mm path, Large Screw Opening, Pack of 2
$598.00
Quartz Screw-Top Cuvette MQQSC008 combines a 3 mm optical path with Four-Way Light geometry and a large M10 screw opening. Its 1050 µL nominal capacity and included screw closures suit UV/Vis work that needs top filling and optical access from more than two sides. The listed sale unit is a pack of 2.
Description
MQQSC008 is a JGS1 quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 3 mm optical path, Four-Way Light configuration and a large M10 screw opening. It is a practical choice when you want a short path length, covered top access and optical access around more than two faces of the same cell. The nominal capacity is 1050 µL, and this listing is for a pack of 2 with accompanying closures.
- Path Length
- 3 mm
- Sample Volume (Nominal)
- 1.05 mL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 3 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.05 mL |
| Cell Body Dimensions | 12.5 × 5.5 × 38 mm |
| Overall Height without Closure | 54 mm |
| Body Height | 38 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 5.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Closure Thread | M10 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQSC008 when your method uses a 3 mm path but your setup also benefits from side optical access. The large screw opening makes filling and emptying straightforward, while the supplied closure lets you cover the sample during routine handling. Four-Way Light is the key structural difference here: it gives optical access on multiple faces without changing to a different cell style.
What makes this option different
- 3 mm optical path for methods built around a shorter path length.
- Four-Way Light configuration for optical access on more than two sides of the cell body.
- Large M10 screw opening for direct top filling, with closures included.
- Pack of 2 for the listed sales unit.
Using this cell
Fill the cell through the screw opening, then fit the closure for routine covered handling between preparation and measurement. Keep the same orientation for blank and sample runs so the measurement is taken through the intended faces each time.
The 1050 µL figure is a nominal capacity, not a minimum working volume. Fill to a level that fully covers the illuminated region in your own holder, and remove bubbles before measurement. Wipe the outer optical faces clean and dry before placing the cell in the instrument.
First-use check
- Inspect the optical faces, screw opening and closures for shipping damage or residue.
- Test holder fit and verify beam alignment with a suitable blank.
- After filling, confirm that the illuminated region is covered and free of bubbles.
Fit and optical alignment
View the English selection reference. Also available in the product gallery. Group photographs illustrate options in the series.
The base footprint is 12.5 × 5.5 mm, the body height is 38 mm, and the overall height with cap is 58 mm. Check holder width, insertion depth and top clearance before ordering, especially where space around the cell position is limited.
Z Height is not established for this SKU, so beam-height fit should be checked against your instrument or holder. The M10 thread identifies the closure connection size at the neck; it should not be treated as a pressure-rated fitting specification.

Solvents and cleaning
This cell uses Molded 83 fabrication. This type is commonly selected for organic-solvent methods and applications that may involve heat, but the exact chemical limits for this assembled cell and closure combination are not established here.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with non-abrasive optical tissue or another suitable soft material.
Included with this option
2 Quartz Screw-Top Cuvettes with accompanying closures. The listed price is for the pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving optical path length, cell dimensions, nominal volume, openings, closures and related geometry. If your application depends on a specific beam height, holder envelope or connection arrangement, send a drawing or labelled sketch with the critical dimensions and tolerances.
Send a product-selection enquiry with SKU MQQSC008, your holder or instrument details, sample conditions, required quantity and delivery destination.
Additional information
| Weight | 200 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.