(MQQMC061) Glass Micro Cuvette, 10 mm Path, 350 µL, Four-Way Light
$65.00
MQQMC061 is a glass micro cuvette with a 10 mm optical path, Four-Way Light layout and 350 µL nominal capacity. Its 1 mm slit suits compact sample regions for visible spectroscopy or visible-light fluorescence, and the supplier limits this cell to neutral solutions. The listed price is for 1 cell with caps and protective packaging.
Description
MQQMC061 combines a 10 mm optical path with a 1 mm slit in a glass micro cuvette format. This Four-Way Light version is intended for visible spectroscopy and visible-light fluorescence across 350–2000 nm, with a 350 µL nominal capacity for methods that need a compact sample region rather than a full-volume cell.
It is supplied as one glass micro cuvette with caps and protective packaging. The side optical access can be useful in compatible fluorescence layouts, while the narrow slit and micro-volume body make careful filling and alignment more important than in a larger open cell.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 350 µL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | Visible Spectroscopy; Visible-Light Fluorescence |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 350 nm |
| Wavelength Range — Upper Limit | 2000 nm |
| Sample Volume (Nominal) | 350 µL |
| Material | Glass |
| Closure Type | Lid |
| Closure Included | Yes |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Glass micro cuvette; Caps and protective packaging |
Choose this option
Choose MQQMC061 when you need a standard 10 mm path in a micro-format cell and your method works with a compact sample region. The Four-Way Light layout suits visible-light setups that use side optical access, and the neutral-solution restriction makes this a practical choice for routine compatible samples rather than aggressive chemistries.
What makes this option different
- 10 mm path with 1 mm slit for a compact sample region while keeping the standard 1 cm path length.
- Four-Way Light layout for visible-light setups that use optical access from more than two faces.
- 350 µL nominal capacity in a micro cuvette format for small-sample handling.
- Neutral-solution use only under the supplier’s stated restriction for this glass cell.
- Caps included with 1 cell per listed price unit.
Using this cell
Fill carefully so the liquid covers the illuminated region, then keep the same orientation for blank and sample measurements. In a narrow 1 mm slit, bubbles and residue are easier to bring into the light path, so inspect the cell after filling and wipe the outside faces clean and dry before reading.
This model is for visible-light methods within the stated 350–2000 nm range. The 350 µL figure is a nominal capacity, not a stated minimum working volume, so final fill level should be checked against your actual beam position.
First-use check
- Inspect the slit, optical faces and top opening for chips, residue or handling marks.
- Seat the cell in the holder and confirm stable positioning before filling.
- Run a suitable blank in the final measurement orientation.
- Recheck for bubbles before reading your sample.
Fit and optical alignment
View the English selection reference for this slit and path option. It is useful for checking the optical layout against your holder and beam geometry.
Z Height is not established for this SKU, so do not treat the 1 mm slit as a beam-center-height value. If alignment is critical, check holder depth, beam footprint and beam position in your instrument before ordering.

Solvents and cleaning
Standard 80 indicates an adhesive-bonded glass construction. For this selected SKU, the supplier restricts use to neutral solutions, which makes it suitable for compatible room-temperature neutral samples and buffers in visible-light work.
Avoid organic samples and organic cleaning solvents on this bonded glass assembly. Do not use hydrofluoric acid on glass, and avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with non-abrasive optical tissue.
Included with this option
1 glass micro cuvette, with caps and protective packaging. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; final feasibility, quantity, specifications, price and production time are confirmed in the project quotation. Modified designs are quoted separately from the listed SKU. Contact us here and mention MQQMC061.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.