(MQQSC070) Quartz Screw-Top Cuvette, Broad Rectangular Chamber
$948.00
MQQSC070 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with Five-Sided Optical Windows, stated 37.5/22.5 mm optical paths and 18000 µL nominal capacity. Its broad rectangular body and single M16 threaded neck suit larger filled samples that need covered top access and optical access from more than two faces. Sold as 1 piece with an accompanying closure.
Description
MQQSC070 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy, built around a broad rectangular chamber with Five-Sided Optical Windows. The stated 37.5/22.5 mm optical paths and 18000 µL nominal capacity make it useful when you need a larger filled cell, covered sample access from the top, and optical access from more than two sides. This option is sold as one cell with an accompanying closure.
- Path Length
- 37.5 mm / 22.5 mm (dual path)
- Sample Volume (Nominal)
- 18 mL
- Opening Configuration
- Single Threaded Neck
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 37.5 mm / 22.5 mm (dual path) |
| Light Transmission Configuration | Five-Sided Optical Windows |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 18 mL |
| Cell Body Dimensions | 30 × 25 × 40 mm |
| Overall Height without Closure | 55 mm |
| External Dimensions Scope | Body Only |
| Overall Height with Closure | 59 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Opening Configuration | Single Threaded Neck |
| Closure Thread | M16 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying PTFE screw cap |
Choose this option
Choose MQQSC070 when your method needs this large rectangular chamber format rather than a narrow analytical cell. The single threaded neck gives you straightforward top filling and closure, while the five-sided optical layout supports setups that need transmission through more than one face pair or added side access around the sample region. Its larger nominal capacity is also helpful when your method is built around a substantial fill volume instead of a micro-volume chamber.
What makes this option different
- Five-Sided Optical Windows provide optical access from more than two faces around the sample chamber.
- Stated 37.5/22.5 mm optical paths suit methods designed around this declared path combination.
- 18000 µL nominal capacity supports larger filled sample volumes than small screw-top cells.
- Single M16 threaded neck with screw cap gives covered top access for filling and handling.
Using this cell
Fill the cell so the sample fully covers the illuminated region used in your measurement. Keep the same orientation for blank and sample runs, remove visible bubbles before reading, and wipe away exterior droplets or fingerprints from the optical faces.
The screw-top opening is convenient for filling, emptying and routine sample handling. It should be treated as a sample closure, not as a pressure-rated connection or transport seal.
First-use check
- Inspect the optical faces, threaded opening and chamber for chips, dust or visible residue.
- Test holder fit and beam alignment with a suitable blank before sample measurements.
- After filling, confirm that the illuminated region is covered and that no bubbles remain in the light path.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The bare optical body is 30 × 25 × 40 mm. Overall height with the cap fitted is 59 mm, so holder planning should include the body section, the threaded neck above it, and the top clearance needed to open or remove the cap.
Z Height is not listed for this SKU. If your instrument or holder depends on a defined beam height, check that point directly rather than estimating it from the outer dimensions. The nominal capacity is also not a minimum working volume.

Solvents and cleaning
This cuvette uses Molded 83 fabrication and a quartz body. Molded 83 quartz is commonly selected for methods that may involve organic solvents, but cleaning and sample conditions should still be considered for the complete assembly, including the closure used in your setup.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with non-abrasive tissue and a suitable cleaning liquid for your process.
Included with this option
1 Quartz Screw-Top Cuvette and an accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification; feasibility, quantity, price and timing are confirmed in the project quotation.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.

















Reviews
There are no reviews yet.