Site Navigation

(MQQPA001) Glass Particle Analysis Cell, Square Optical Chamber

Weight50 g
SKU: MQQPA001

$179.00

In Stock

Glass particle analysis cell with a 10 mm optical path, Four-Way Light access and an open-top body with a flat lid. Its 3500 µL nominal volume and square 12 × 12 mm body suit particle analysis setups that need direct top filling and optical access from four sides. The listed price is for 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQPA001 is a glass Particle Analysis Cell for particle analysis methods from 350 nm upward. It combines a 10 mm optical path with Four-Way Light access, plus an open-top square body and flat lid, so you can fill directly from above while keeping optical access on four sides. The 3500 µL nominal volume and 12 × 12 × 45 mm body are useful when you need this specific cell geometry rather than a standard 12.5 mm square format.

Path Length
10 mm
Sample Volume (Nominal)
3.5 mL
Opening Configuration
Open Top

Selection Specifications

Product KindSpecialized Cell
Cell TypeParticle Analysis Cell
Measurement ModeParticle Analysis
Path Length10 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit350 nm
Sample Volume (Nominal)3.5 mL
External Dimensions12 × 12 × 45 mm
Body Height45 mm
Base Dimensions12 × 12 mm
MaterialGlass
Closure TypeFlat Lid
Closure IncludedYes
Fabrication MethodMolded 83
Opening ConfigurationOpen Top
Pack Quantity1 Piece
Package Contents1 × Glass Particle Analysis Cell; Accompanying closure

Choose this option

Choose this cell when your method is built around a 10 mm path length and a four-side optical layout, and when your holder needs the actual 12 × 12 mm square body shown for this model. The open top makes loading straightforward, while the supplied lid supports covered use after filling. This is a practical choice for particle analysis work where body size, beam access and loading style all need to match the existing setup.

What makes this option different

  • 10 mm optical path for methods configured around this path length.
  • Four-Way Light configuration provides optical access on four sides of the cell body.
  • Open top with flat lid allows direct filling, then covered handling after loading.
  • 12 × 12 × 45 mm body helps distinguish it from standard 12.5 mm square formats when checking holder fit.

Using this cell

Fill the cell from the top opening and place the lid after loading if your procedure uses a covered cell. Keep the optical faces and the sample region clean, and remove visible bubbles before measurement.

Use the same orientation for blank and sample runs so the optical arrangement stays consistent. Exterior droplets or residue on the light path can affect the reading, so wipe the outside faces before placing the cell in the holder.

First-use check

  1. Inspect the optical faces, top opening and lid seating area before first use.
  2. Place the empty cell in the holder and check seating, clearance and access from the top.
  3. Run a suitable blank after filling, and confirm that the optical area is free of bubbles and exterior residue.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The external body size is 12 × 12 × 45 mm. Check that your holder accepts this square body and that the top opening remains accessible in your instrument or fixture.

If your instrument uses a fixed beam centerline, check beam position separately before ordering, because Z Height is not established for this SKU. A similar application reference or matching path length alone does not confirm full fit.

English selection reference
Selection reference ↗

Solvents and cleaning

This is a glass cell with an integrated-forming construction and Molded 83 fabrication. It is intended for particle analysis use where this glass construction suits the sample and cleaning routine you plan to use.

Chemical compatibility for the exact assembly is not established here, so do not treat broad acid- or alkali-resistance wording as a guarantee for every liquid or cleaning method. Avoid hydrofluoric acid, hot strong alkalis and abrasive cleaners. For unfamiliar liquids, extended contact or demanding cleaning conditions, check the suitability of the complete cell-and-lid assembly under your actual concentration, temperature and contact time.

Included with this option

1 Glass Particle Analysis Cell with an accompanying closure. The listed price is for 1 piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If your setup needs a different body size, optical path, opening style or related geometry, send your drawing or holder details for review. Custom projects are generally discussed in JGS1 quartz, with feasibility, quantity, price and production time confirmed for the project. Send a product-selection enquiry with SKU MQQPA001, your holder or drawing, sample conditions and required quantity.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQPA001) Glass Particle Analysis Cell, Square Optical Chamber”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare