Site Navigation

(MQQFC017) Quartz Rectangular Sample Cell, 2 mm / 0.5 mm Separate Gaps, Open at Both Ends

Weight120 g
SKU: MQQFC017

$236.00

In Stock

MQQFC017 is a JGS1 quartz rectangular sample cell with Two-Way Light access and an open-at-both-ends body. Its source drawing marks two separate narrow gap regions, labelled 2 mm and 0.5 mm, for fixtures that align to a chosen measurement position rather than one uniform chamber layout. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
SKU: MQQFC017 Categories: , , Tags: ,
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC017 is a JGS1 quartz rectangular sample cell for custom optical setups that use a slim open body and a selected beam position. The source drawing marks two separate narrow gap regions, labelled 2 mm and 0.5 mm, within the same cell body rather than one single uniform sample section. With a 35 × 5 × 42 mm outer size and Two-Way Light access, it suits fixtures that need a compact rectangular form and a defined transmission direction.

Cell Type
Rectangular Sample Cell
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
External Dimensions35 × 5 × 42 mm
Body Height42 mm
Base Dimensions35 × 5 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodStandard 80
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose MQQFC017 when your setup is built around one of two distinct labelled sample regions in the same quartz body. The open-at-both-ends format gives direct access for filling and for custom end support, while the slim 5 mm body thickness can help where holder clearance is limited. This option is most useful when your fixture already defines how the cell is retained and where the beam will pass.

View the English selection reference.

What makes this option different

  • Two labelled narrow regions in one body: the drawing identifies separate 2 mm and 0.5 mm gap positions, so beam placement matters and the exact optical section depends on how the cell is arranged in your fixture.
  • Open at both ends: you have direct access for filling, rinsing and inspection, but sample retention and any sealing must come from your own holder or end arrangement.
  • Two-Way Light layout: this cell is arranged for transmission through the specified optical direction, not side-access measurement geometry.
  • Slim rectangular envelope: the 35 × 5 × 42 mm body is easy to place in narrow rectangular clamps or custom mounts where thickness is restricted.
  • Adhesive-bonded quartz construction: the supplier identifies this as an adhesive-bonded assembly, which is a practical choice for routine room-temperature aqueous and buffer-based work.
  • JGS1 quartz material: listed for 200–2500 nm material range, useful when your method requires quartz rather than glass.

Using this cell

Set the cell in a holder that keeps one chosen labelled region in the beam path, and keep that orientation the same for blank and sample measurements. Because the two marked gaps are separate positions in the body, do not treat them as one interchangeable uniform chamber.

The open ends make manual filling and rinsing straightforward, but they also mean the cell itself does not provide a built-in closure. Plan how the sample will be introduced, retained and supported before routine use, especially if the cell will be mounted vertically or handled outside a bench fixture.

First-use check

  1. Inspect the optical faces and both open ends for chips, residue or handling marks.
  2. Place the cell in the holder and verify that the beam passes through the intended labelled region without clipping.
  3. Test your filling and retention method with a blank solution before introducing sample.

Fit and optical alignment

Check clearance against the full 35 × 5 × 42 mm outer dimensions. The slim body can fit compact holders, but the mount should support the cell evenly and avoid concentrated force at the end edges or across the optical faces.

Z Height is not specified for this cell. If your instrument or holder needs a defined beam-center height, verify the mounted beam position in the actual assembly rather than assuming alignment from the outer size alone.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is generally suited to routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents on the bonded assembly.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean gently with a suitable lint-free, non-abrasive wipe.

Included with this option

1 MQQFC017 rectangular sample cell. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz versions for changes to the labelled gap layout, outer dimensions, openings and holder-related geometry. If you need a different body format or a layout matched to your fixture, send a labelled sketch or drawing with the critical dimensions and sample conditions.

Send a product-selection enquiry with SKU MQQFC017 and your holder or layout details.

Additional information

Weight120 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC017) Quartz Rectangular Sample Cell, 2 mm / 0.5 mm Separate Gaps, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare