Site Navigation

(MQQFC074) Quartz Flow Cell, 40/10 mm Paths, 14 mL, Opposite-Edge Tubes

Weight70 g
SKU: MQQFC074

$539.00

In Stock

JGS1 quartz flow cell with 40 mm and 10 mm optical paths, 14 mL nominal capacity and five optical faces. Two quartz tubes connect on opposite edges; each is 8 mm OD / 6 mm ID and projects 10 mm. The body is 42.5 × 45 × 12.5 mm, excluding tubes. Molded 83 construction; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
SKU: MQQFC074 Categories: , , Tags: , ,
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC074 combines two specified optical paths, 40 mm and 10 mm, within a 14 mL nominal sample chamber. This version uses opposite-edge tubes, so its connection directions are as important to selection as its optical dimensions.

Path Length
40 mm / 10 mm (dual path)
Sample Volume (Nominal)
14 mL
Opening Configuration
Two Opposed Side Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length40 mm / 10 mm (dual path)
Light Transmission ConfigurationFive-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)14 mL
External Dimensions42.5 × 45 × 12.5 mm
Cell Body Dimensions42.5 × 45 × 12.5 mm
External Dimensions ScopeBody Only
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)8 mm
Tube Inner Diameter (ID)6 mm
Fabrication MethodMolded 83
Opening ConfigurationTwo Opposed Side Tubes
Port Layoutfirst opposing side, OD 8 mm, ID 6 mm; other opposing side, OD 8 mm, ID 6 mm
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Select this configuration when your method and fixture require the 40/10 mm path combination with connections on opposite edges. The alternative tube arrangement in this family has different clearance needs even though its nominal capacity and body dimensions are the same.

What makes this option different

  • 40 mm and 10 mm optical paths: align the intended beam direction with the path your method requires. These are optical distances, rather than tube lengths.
  • Five optical faces: these provide optical access around the chamber for a suitable fixture and measurement arrangement. Five faces do not mean five fluid connections or five independently specified optical paths.
  • Opposite-edge connections: leave clearance on both connection sides without assuming that a particular holder or tubing route will fit.
  • 8 mm OD / 6 mm ID quartz tubes: each projects 10 mm from the body. Match tubing and support to these actual dimensions; neither tube is assigned a universal inlet or outlet role.
  • 14 mL nominal capacity: this describes the selected chamber option, rather than the complete tubing circuit or a minimum fill volume.

Using this cell

Support the body while making the two fluid connections. Fill and flush with a suitable blank, watching for bubbles in the optical region. Choose inlet and outlet routing for your own setup, and use the same optical alignment for blank and sample.

First-use check

  1. Inspect the optical faces, connection edges and body for damage or residue.
  2. Check fixture support, beam direction and connection clearance before completing the liquid circuit.
  3. Flush with a suitable blank, remove bubbles and establish a stable reference before measuring the sample.

Fit and optical alignment

The quartz body measures 42.5 × 45 × 12.5 mm. These dimensions exclude both projecting tubes. Check the full connection arrangement in the image, holder support and beam access before choosing the version. Keep mechanical loads off the quartz tubes when installing your liquid circuit.

View the English selection reference.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83: Molded 83 identifies the integrated-forming construction mapped for this option. Choose sample and cleaning conditions for the complete wetted assembly, including any seals, adapters or tubing you add. Construction alone does not establish a pressure rating or compatibility with every solvent.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe exterior optical faces gently with non-abrasive optical tissue and handle the assembly by its supported body.

Included with this option

One quartz flow cell with the two fixed quartz tubes shown. External tubing, adapters, clamps and a holder are not stated as included. The listed price is per cell.

Availability and ordering

Contact us to confirm current availability and dispatch timing for your quantity. For a required delivery date, check timing before checkout; preparation and production are separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects involving optical paths, sample regions, optical access, connection geometry and mounting dimensions. Modified designs and prototype batches are quoted separately. Send your drawing, holder details, sample conditions and quantity through the contact page, and include MQQFC074.

Additional information

Weight70 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC074) Quartz Flow Cell, 40/10 mm Paths, 14 mL, Opposite-Edge Tubes”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare