(MQQFC135) Quartz Flow Cell, 4 mm Path, 10 mL, Nested Removable-Plate Chamber
$768.00
JGS1 quartz flow cell with a 4 mm optical path and 10 mL nominal capacity. A broad 50 × 50 × 4 mm chamber sits in a nested frame with a removable quartz plate; two opposite-corner tubes are 3 mm OD / 2 mm ID. The outer frame is 60 × 60 × 9 mm, excluding tube projections. Standard 80 adhesive-bonded construction; one cell in the removable-plate configuration shown.
Description
MQQFC135 is a large-format JGS1 quartz flow cell for UV/Vis work with a 4 mm optical path and 10 mL nominal capacity. Its nested chamber with a removable plate creates a broad 50 × 50 × 4 mm sample region, and the removable quartz plate provides access to the broad chamber for inspection and cleaning.
- Path Length
- 4 mm
- Sample Volume (Nominal)
- 10 mL
- Opening Configuration
- Nested Flow Chamber with Removable Plate
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 4 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 10 mL |
| External Dimensions | 60 × 9 × 60 mm |
| Cell Body Dimensions | 60 × 9 × 60 mm |
| External Dimensions Scope | Body Only |
| Body Height | 60 mm |
| Base Dimensions | 60 × 9 mm |
| Internal Dimensions | 50 × 50 × 4 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 3 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Nested Flow Chamber with Removable Plate |
| Port Layout | Tube near the lower-left corner of the frame as drawn; Tube near the opposite upper-right corner of the frame as drawn |
| Wall Thickness | 1 mm |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell; Removable quartz plate (component of the cell) |
Choose this option
Choose MQQFC135 when a wide illuminated chamber matters as much as the flow connection. The larger internal area is useful for setups that need a broad optical region rather than a narrow channel, and the nested removable-plate construction gives you a distinct assembly style to plan around when checking holder space, tubing approach and chamber access together.
What makes this option different
- 4 mm optical path with a broad chamber: the internal chamber is 50 × 50 × 4 mm rather than a small capillary-style flow passage.
- Nested chamber with removable plate: this is an assembled chamber format, not a simple one-piece tubular body.
- Removable quartz plate: the 52 × 52 × 1 mm plate is a component of the nested chamber. Protect its edges during handling and check seating before filling.
- Separate mechanical and optical dimensions: the specified suspension gap is 3 mm; it is distinct from the 4 mm optical path. The suspension arrangement does not specify a count of transmitting optical faces.
- Two built-in tubes: the cell uses two fluid ports with 3 mm outer diameter and 2 mm inner diameter.
Using this cell
Install the cell with even support across the body and keep tubing loads light on the connection points. Because this is a broad chamber rather than a narrow channel, fill and flush gradually so the optical region is fully covered before you run a blank or sample.
Handle the plate and frame as components of the same cell. Support the frame evenly, keep plate edges clean and check seating after handling. This removable-plate configuration does not provide a specified pressure-rated seal. Establish a working fill that covers the intended measurement region without bubbles; 10 mL is nominal capacity, not a minimum working-fill specification.
First-use check
- Inspect the optical faces, chamber area and tube ends for chips, residue or handling marks.
- Set the cell in the holder and verify that the beam crosses the intended chamber region.
- Fill slowly, remove visible bubbles from the optical region, and then run a blank.
Fit and optical alignment
View the English selection reference.
The outer frame is 60 × 60 × 9 mm; the nested insert is 52 × 52 mm with a 5 mm thickness and a 4 mm raised portion. The separate quartz plate measures 52 × 52 × 1 mm. Leave room not only for the square body but also for the two tube connections, shown near opposite corners of the frame, and for the tubing bend radius outside the cell.
Z Height is not listed for this model, so beam position should be checked from the actual holder arrangement instead of assumed from the body size alone. If your instrument has a fixed beam height, confirm that alignment before ordering.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is best suited to routine room-temperature aqueous samples and buffer solutions. Avoid organic sample solvents and organic cleaning agents with this bonded assembly; if your method needs them, ask about a suitable Sintered or Molded alternative.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.
Included with this option
One quartz flow cell in the nested removable-plate configuration shown. The quartz plate is a component of the cell, not a second cell. The listed price is for one cell; external tubing and adapters are not stated as included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to chamber size, optical path length, overall dimensions, connections, fabrication and related details. Send a dimensioned drawing or labelled sketch together with holder information, sample conditions and target quantity via the contact page, and include SKU MQQFC135.
Design notes for this configuration: Nested Quartz Cell: Defining the Inner Chamber and Removable Parts
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.