Site Navigation

(MQQPA019) Quartz Reflectance Sample Cell, 10 mm Diameter, 1.5 mm Deep Recess

Weight50 g
SKU: MQQPA019

$359.00

In Stock

MQQPA019 is a JGS1 quartz reflectance sample cell with an open circular groove, 10 mm in diameter and 1.5 mm deep, in a compact 12.5 × 2.25 × 12.5 mm body. This format suits reflectance measurements and solid or powder fluorescence methods that use direct top access to the sample surface. Supplied as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQPA019 is a compact JGS1 quartz reflectance sample cell built around an open circular sample groove for direct loading. The 10 mm groove diameter and 1.5 mm recess depth give you a defined sample area for reflectance measurements and solid or powder fluorescence work, while the slim 12.5 × 2.25 × 12.5 mm body helps when holder space is limited. Its stated wavelength range is 200–2500 nm.

Cell Type
Reflectance Sample Cell
Opening Configuration
Open Sample Groove

Selection Specifications

Product KindSpecialized Cell
Cell TypeReflectance Sample Cell
Measurement ModeReflectance Measurements; Solid/Powder Fluorescence
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
External Dimensions12.5 × 2.25 × 12.5 mm
External Dimensions ScopeBody Only
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen Sample Groove
Pack Quantity1 Piece
Slot Depth1.5 mm
Package Contents1 × Quartz Reflectance Sample Cell

Choose this option

Choose MQQPA019 when your method uses an exposed sample surface rather than a filled transmission chamber. The circular recessed groove lets you place, level and inspect a small sample directly in the measurement area, and the thin plate-style body is easier to plan into compact stages, fixtures or sample holders than a larger block format.

What makes this option different

  • Open circular groove: the sample sits in a recessed 10 mm diameter area with direct top access.
  • Shallow 1.5 mm recess: suitable for a controlled surface layer in reflectance-style measurement.
  • Compact body: the 12.5 × 2.25 × 12.5 mm quartz body is useful where holder clearance is tight.
  • JGS1 quartz: specified for use across 200–2500 nm for applicable setups.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Load the sample directly into the circular groove and keep material off the surrounding rim and outer optical faces. For powders or loose solids, level the exposed surface as consistently as your method requires so the measured area is repeatable from run to run.

This cell is intended for reflectance measurements and solid or powder fluorescence arrangements. The 1.5 mm dimension is the groove depth only. It is not a transmission path length and it should not be treated as a working liquid volume specification.

First-use check

  1. Inspect the groove and outer faces for chips, residue or handling marks.
  2. Seat the cell in the holder and verify that the intended sample area is accessible to your beam or pickup geometry.
  3. Run your blank or background in the same orientation you will use for measurement.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

Check your holder opening, support area and optical access against the 12.5 × 2.25 × 12.5 mm body and the exposed groove format. Z Height is not established for this SKU, so a fixed optical mount should be checked against your own beam position or stage geometry before ordering.

If you are replacing an existing reflectance cell, compare both the body envelope and the location of the sample area in your holder. Groove diameter alone is not enough to judge fit.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Molded 83 quartz construction. That construction is commonly selected for quartz cells used in organic-solvent methods and methods that may involve temperature, but suitability still depends on the full sample and cleaning conditions of this exact assembly.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the groove and outer faces gently with non-abrasive materials suitable for optical surfaces, and remove residue from the recess promptly after use.

Included with this option

1 Quartz Reflectance Sample Cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz versions for changes to body size, groove geometry and other application-specific dimensions. Send your drawing or holder details together with the measurement method, sample form and any critical fit points through the contact page, and include SKU MQQPA019.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQPA019) Quartz Reflectance Sample Cell, 10 mm Diameter, 1.5 mm Deep Recess”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare