Site Navigation

(MQQFC024) Quartz Rectangular Sample Cell, 3.5 mm Path, 3 mL, Open at Both Ends

Weight50 g
SKU: MQQFC024

$179.00

In Stock

Quartz rectangular sample cell with a 3.5 mm optical path, Two-Way Light transmission and 3 mL nominal capacity. Its open-at-both-ends body suits setups that use an external holder, end support or sealing arrangement around a long rectangular sample region. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC024 is a JGS1 quartz rectangular sample cell for setups that need a defined 3.5 mm transmission path in an open sample body. Its 3 mL nominal capacity and 19 × 3.5 × 50 mm internal chamber give you a long rectangular sample region, while the open ends leave filling, retention and any sealing to your surrounding fixture.

Path Length
3.5 mm
Sample Volume (Nominal)
3 mL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length3.5 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)3 mL
External Dimensions25 × 10.5 × 50 mm
Body Height50 mm
Base Dimensions25 × 10.5 mm
Internal Dimensions19 × 3.5 × 50 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodStandard 80
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose MQQFC024 when your layout is built around a 3.5 mm optical path and you want the cell body integrated into your own holder or end arrangement rather than supplied as a closed cuvette. The 25 × 10.5 × 50 mm outer body and the long internal chamber help when body clearance and sample-region length both matter in the same design.

View the English selection reference.

What makes this option different

  • Open at both ends for installations that use external end support, filling access or sealing outside the cell body.
  • 3.5 mm optical path for methods that require this specific transmission distance through the sample.
  • Two-Way Light layout with a defined straight-through optical direction rather than side-access geometry.
  • 19 × 3.5 × 50 mm internal chamber with 3 mL nominal capacity for a long rectangular sample region.
  • 25 × 10.5 × 50 mm external body for holder and clearance checks based on the outside envelope, not the chamber size.
  • Standard 80 adhesive-bonded quartz construction, typically chosen for room-temperature aqueous samples and buffers rather than organic-solvent methods.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Install the cell in a holder that supports the body evenly and keeps the measurement direction fixed through the 3.5 mm path. Because the body is open at both ends, filling method, end retention and bubble control come from the complete assembled setup rather than from the cell alone.

The 3 mL figure is the nominal chamber capacity. It should not be treated as a stated minimum working volume, so practical fill conditions should be established in your final holder and measurement orientation.

First-use check

  1. Inspect the optical faces, edges and open ends before installation.
  2. Trial-fit the cell and confirm that support points do not concentrate force on the optical faces.
  3. Run a blank in the final assembled arrangement to check alignment, filling and bubble control.

Fit and optical alignment

Check fit by the 25 × 10.5 × 50 mm external dimensions. The 19 × 3.5 × 50 mm dimensions describe the internal chamber and help you understand the sample region, but they are not the holder-contact dimensions.

Z Height is not stated for this item. If your instrument uses a fixed beam position, confirm beam alignment through your holder design instead of assuming a standard cuvette beam center.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell is listed as Standard 80 with an adhesive-bonded quartz construction. That fabrication is generally selected for room-temperature aqueous samples and buffers.

If your method uses organic solvents, heated cleaning or other demanding chemical conditions, check suitability for the exact assembly before ordering. Clean with non-abrasive materials and avoid scratching the transmitting faces.

Included with this option

1 rectangular sample cell, SKU MQQFC024. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body envelope, end geometry or holder interface, send your drawing or labelled sketch with the critical dimensions, beam position, sample conditions and required quantity. Custom JGS1 quartz projects are quoted case by case.

Send a product-selection enquiry with SKU MQQFC024 and your holder or sealing details.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC024) Quartz Rectangular Sample Cell, 3.5 mm Path, 3 mL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare