(MQQFC024) Quartz Rectangular Sample Cell, 3.5 mm Path, 3 mL, Open at Both Ends
Description
MQQFC024 is a JGS1 quartz rectangular sample cell for setups that need a defined 3.5 mm transmission path in an open sample body. Its 3 mL nominal capacity and 19 × 3.5 × 50 mm internal chamber give you a long rectangular sample region, while the open ends leave filling, retention and any sealing to your surrounding fixture.
- Path Length
- 3.5 mm
- Sample Volume (Nominal)
- 3 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 3.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3 mL |
| External Dimensions | 25 × 10.5 × 50 mm |
| Body Height | 50 mm |
| Base Dimensions | 25 × 10.5 mm |
| Internal Dimensions | 19 × 3.5 × 50 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC024 when your layout is built around a 3.5 mm optical path and you want the cell body integrated into your own holder or end arrangement rather than supplied as a closed cuvette. The 25 × 10.5 × 50 mm outer body and the long internal chamber help when body clearance and sample-region length both matter in the same design.
What makes this option different
- Open at both ends for installations that use external end support, filling access or sealing outside the cell body.
- 3.5 mm optical path for methods that require this specific transmission distance through the sample.
- Two-Way Light layout with a defined straight-through optical direction rather than side-access geometry.
- 19 × 3.5 × 50 mm internal chamber with 3 mL nominal capacity for a long rectangular sample region.
- 25 × 10.5 × 50 mm external body for holder and clearance checks based on the outside envelope, not the chamber size.
- Standard 80 adhesive-bonded quartz construction, typically chosen for room-temperature aqueous samples and buffers rather than organic-solvent methods.
Structure and dimensions

Using this cell
Install the cell in a holder that supports the body evenly and keeps the measurement direction fixed through the 3.5 mm path. Because the body is open at both ends, filling method, end retention and bubble control come from the complete assembled setup rather than from the cell alone.
The 3 mL figure is the nominal chamber capacity. It should not be treated as a stated minimum working volume, so practical fill conditions should be established in your final holder and measurement orientation.
First-use check
- Inspect the optical faces, edges and open ends before installation.
- Trial-fit the cell and confirm that support points do not concentrate force on the optical faces.
- Run a blank in the final assembled arrangement to check alignment, filling and bubble control.
Fit and optical alignment
Check fit by the 25 × 10.5 × 50 mm external dimensions. The 19 × 3.5 × 50 mm dimensions describe the internal chamber and help you understand the sample region, but they are not the holder-contact dimensions.
Z Height is not stated for this item. If your instrument uses a fixed beam position, confirm beam alignment through your holder design instead of assuming a standard cuvette beam center.

Solvents and cleaning
This cell is listed as Standard 80 with an adhesive-bonded quartz construction. That fabrication is generally selected for room-temperature aqueous samples and buffers.
If your method uses organic solvents, heated cleaning or other demanding chemical conditions, check suitability for the exact assembly before ordering. Clean with non-abrasive materials and avoid scratching the transmitting faces.
Included with this option
1 rectangular sample cell, SKU MQQFC024. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, body envelope, end geometry or holder interface, send your drawing or labelled sketch with the critical dimensions, beam position, sample conditions and required quantity. Custom JGS1 quartz projects are quoted case by case.
Send a product-selection enquiry with SKU MQQFC024 and your holder or sealing details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.