(MQQFC129) Quartz Flow Cell, 0.5 mm path, 500 µL nominal capacity, Longer Polygonal Chamber
$588.00
Quartz flow cell for UV/Vis work with a 0.5 mm optical path, 500 µL nominal capacity and two opposed quartz tubes. This JGS1 quartz version uses a longer 45 × 23 × 0.5 mm internal section and Molded 83 fabrication for inline layouts that can accept more linear clearance. Sold as 1 piece.
Description
MQQFC129 is a JGS1 quartz flow cell for UV/Vis setups that need a 0.5 mm optical path with a longer internal measurement section. Its 500 µL nominal capacity, 45 × 23 × 0.5 mm internal dimensions and opposed tube connections make it useful when you want the same short path format as related versions but with a longer sample region.
- Path Length
- 0.5 mm
- Sample Volume (Nominal)
- 500 µL
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 0.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 500 µL |
| Internal Dimensions | 45 × 23 × 0.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Port Layout | End/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC129 when your method is built around a 0.5 mm path and the longer chamber of this format fits your holder space and liquid route. The longer internal section and higher nominal capacity distinguish it from the shorter chamber version, while keeping the same opposed-tube inline layout.
What makes this option different
- 0.5 mm optical path for short-path UV/Vis transmission measurements.
- 500 µL nominal capacity paired with the longer chamber format of this series.
- 45 × 23 × 0.5 mm internal dimensions for planning the actual sample region inside the cell.
- Two opposed quartz tubes, 4 mm OD and 2 mm ID for a straight-through connection layout.
Using this cell
Install the cell so the optical beam crosses the 0.5 mm path in the intended measurement direction. Fill gradually, flush out visible bubbles from the optical region and run a blank after the flow path is fully wetted.
Handle the cell by the main body rather than by the projecting tubes. No pressure rating is stated for this SKU, so pressurized use should be checked against your own tubing, fittings and operating conditions.
First-use check
- Inspect the optical faces, body edges and tube ends before connecting the cell.
- Confirm holder clearance and tubing approach before introducing solvent or sample.
- Run a blank after the flow path is fully wetted and free of visible bubbles.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
This version needs more linear space than the shorter chamber model. The source drawing shows a 90 mm overall length reference and a 26 mm overall height reference, which are useful for general planning, but a complete confirmed assembly envelope is not available for this SKU.
Z Height is not listed, so beam-center alignment should be checked from your holder or instrument geometry before ordering. Matching the path length alone does not establish drop-in fit.

Solvents and cleaning
This cell is made from JGS1 quartz with Molded 83 fabrication. That construction is often selected for quartz cells used with organic-solvent methods or temperature-related cleaning steps, but the complete wetted assembly should be reviewed for your actual process.
Chemical limits are not specified for this exact SKU. Do not use hydrofluoric acid with quartz, avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with suitable non-abrasive lab wipes.
Included with this option
1 Quartz Flow Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects for changes in path length, capacity, body size, connections or other drawing-based requirements. Modified designs are quoted separately from the listed SKU.
Send a product-selection enquiry with SKU MQQFC129, your holder details, connection layout, sample conditions and required quantity.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.