Site Navigation

(MQQFC117) JGS1 Quartz Flow Cell, 0.6 mm Path, 170 µL, Bent Tubes

Weight50 g
SKU: MQQFC117

$648.00

In Stock

JGS1 quartz flow cell with a 0.6 mm optical path and 170 µL nominal capacity. Its flat 50 × 6.5 × 1.4 mm optical section is connected to two bent tubes, each with 5 mm OD / 3 mm ID. Supplied as one cell.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC117 is a JGS1 quartz flow cell with 0.6 mm optical path and 170 µL nominal capacity. The bent end tubes lead away from the flat central measuring section. Its 50 × 6.5 × 1.4 mm body and 5 mm OD / 3 mm ID tubes should be checked separately when planning the measurement region and fluid connections.

View the English selection reference.

Path Length
0.6 mm
Sample Volume (Nominal)
170 µL
Opening Configuration
Two Bent End Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length0.6 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)170 µL
Cell Body Dimensions50 × 6.5 × 1.4 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)5 mm
Tube Inner Diameter (ID)3 mm
Fabrication MethodMolded 83
Opening ConfigurationTwo Bent End Tubes
Port LayoutBent tube at the left end of the flattened optical section as drawn; Bent tube at the right end of the flattened optical section as drawn
Wall Thickness0.4 mm
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose this cell for a method requiring a 0.6 mm path in a slim, flattened optical section. The bent tubes provide connection approaches away from the middle of that section; check their orientation against your holder and tubing route.

What makes this option different

  • 0.6 mm specified optical path.
  • 170 µL nominal capacity.
  • The bent end tubes lead away from the flat central measuring section.
  • 5 mm OD / 3 mm ID tube connection dimensions.

Structure and dimensions

MQQFC117 body and connection dimensions; allow separate clearance for the projecting tubes.
MQQFC117 body and connection dimensions; allow separate clearance for the projecting tubes.Open image ↗

Using this cell

Align the 0.6 mm transmission path with your instrument beam and keep the installed position consistent for blank and sample measurements.

Support the body during installation and relieve strain from the connected tubing. Fill and flush carefully, checking that the illuminated region is covered and free of bubbles. The 170 µL value is nominal capacity, not a minimum working-volume specification; external tubing and connectors hold additional liquid.

First-use check

  1. Inspect the optical region, body and tube ends.
  2. Test holder support and connection clearance before introducing liquid.
  3. Run a method blank after bubble removal in the final installed position.

Fit and optical alignment

The flat optical section measures 50 × 6.5 × 1.4 mm. The drawing separately gives a 93 mm projected span and a 35 mm tube-leg dimension. The 1.4 mm thickness applies to the flat section; the connecting tubes are 5 mm OD. Plan the complete mounting and tube clearance from these separate dimensions.

A Z Height is not specified for this option. Compare your beam position and footprint with the mounted optical region. Send any pressurized-system requirements for assessment of the complete cell, connections and operating conditions before use.

Solvents and cleaning

Molded 83 is the MQ fabrication option for this cell, generally selected for organic-solvent methods or temperature-controlled work. Review the complete wetted assembly, including tubing and any connectors, for your liquid, concentration, temperature and contact time.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean exterior optical faces gently with suitable non-abrasive optical tissue.

Included with this option

One MQQFC117 quartz flow cell. The listed price is for one cell. Photographs showing more than one cell or a mounting arrangement illustrate the product; the sales unit remains one flow cell.

Availability and ordering

Contact us to check current availability and dispatch timing when a delivery date matters to your work. Preparation or production, carrier transit and customs clearance are separate considerations.

Discuss a custom version

We can review changes to optical path, chamber geometry, tube position or connection dimensions. Send your requirements with SKU MQQFC117, a drawing or holder details, liquid conditions and quantity.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC117) JGS1 Quartz Flow Cell, 0.6 mm Path, 170 µL, Bent Tubes”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare