Site Navigation

(MQQFC119) JGS1 Quartz Flow Cell, 40 / 5 mm Paths, 6 mL, Dual Paths

Weight75 g
SKU: MQQFC119

$299.00

In Stock

Standard 80 adhesive-bonded JGS1 quartz flow cell with 40 mm and 5 mm optical paths and 6 mL nominal capacity. Opposed side tubes have 5 mm OD / 3 mm ID; this construction is selected for routine room-temperature water-based samples and buffers. One cell is supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC119 is a JGS1 quartz flow cell with 40 / 5 mm optical paths and 6 mL nominal capacity. The two tubes project from opposite sides of the quartz body. Its 43 × 8 × 43 mm body and 5 mm OD / 3 mm ID tubes should be checked separately when planning the measurement region and fluid connections.

View the English selection reference.

Path Length
40 mm / 5 mm (dual path)
Sample Volume (Nominal)
6 mL
Opening Configuration
Two Opposed Side Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length40 mm / 5 mm (dual path)
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)6 mL
External Dimensions43 × 8 × 43 mm
Cell Body Dimensions43 × 8 × 43 mm
External Dimensions ScopeBody Only
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)5 mm
Tube Inner Diameter (ID)3 mm
Fabrication MethodStandard 80
Opening ConfigurationTwo Opposed Side Tubes
Port LayoutOpposite lateral face A, upper connection shown on the right; Opposite lateral face B, lower connection shown on the left
Wall Thickness1.5 mm
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose this dual-path cell when your UV/Vis method needs 40 mm and 5 mm measurement directions in the same chamber. Its opposed lateral tubes suit a fixture that can support the broad rectangular body and give clearance on both connection sides.

What makes this option different

  • 40 / 5 mm specified optical path directions.
  • 6 mL nominal capacity.
  • The two tubes project from opposite sides of the quartz body.
  • 5 mm OD / 3 mm ID tube connection dimensions.

Structure and dimensions

MQQFC119 body and connection dimensions; allow separate clearance for the projecting tubes.
MQQFC119 body and connection dimensions; allow separate clearance for the projecting tubes.Open image ↗

Using this cell

Select the required 40 mm or 5 mm optical direction before preparing the blank, and keep that same direction and seating for sample readings. Four-sided optical access provides the two specified transmission directions; the path lengths do not describe the tube bores.

Support the body during installation and relieve strain from the connected tubing. Fill and flush carefully, checking that the illuminated region is covered and free of bubbles. The 6 mL value is nominal capacity, not a minimum working-volume specification; external tubing and connectors hold additional liquid.

First-use check

  1. Inspect the optical region, body and tube ends.
  2. Test holder support and connection clearance before introducing liquid.
  3. Run a method blank after bubble removal in the final installed position.

Fit and optical alignment

The 43 × 8 × 43 mm dimensions describe the quartz body. Both side tubes project beyond it, so allow additional room for the connections, tubing bends and access during installation.

A Z Height is not specified for this option. Compare your beam position and footprint with the mounted optical region. Send any pressurized-system requirements for assessment of the complete cell, connections and operating conditions before use.

Solvents and cleaning

Standard 80 is an adhesive-bonded construction for routine room-temperature water-based samples and buffers. Avoid organic samples and organic cleaning solvents with this assembly. For solvent-based, heated or demanding chemical methods, compare an appropriate Sintered or Molded construction for the complete cell and connections.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean exterior optical faces gently with suitable non-abrasive optical tissue.

Included with this option

One MQQFC119 quartz flow cell. The listed price is for one cell.

Availability and ordering

Contact us to check current availability and dispatch timing when a delivery date matters to your work. Preparation or production, carrier transit and customs clearance are separate considerations.

Discuss a custom version

We can review changes to optical path, chamber geometry, tube position or connection dimensions. Send your requirements with SKU MQQFC119, a drawing or holder details, liquid conditions and quantity.

Additional information

Weight75 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC119) JGS1 Quartz Flow Cell, 40 / 5 mm Paths, 6 mL, Dual Paths”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare