(MQQFC113) JGS1 Quartz Flow Cell, 10 mm Path, 900 µL, 15 mm Z Height
Description
MQQFC113 is a JGS1 quartz flow cell for UV/Vis setups that need a 10 mm optical path together with a defined 15 mm beam-center height. Its 900 µL nominal capacity, tall 4.5 × 20 mm optical window and two top fluid connections make it easier to match both the optical line and the mechanical holder in a compact upright format.
This version uses adhesive-bonded quartz construction and is classified as Standard 80. It is supplied as 1 piece.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 900 µL
- Opening Configuration
- Two Top Fluid Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Z Height | 15 mm |
| Optical Window Dimensions | 4.5 × 20 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 900 µL |
| External Dimensions | 12.5 × 12.5 × 55 mm |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 3 mm |
| Tube Inner Diameter (ID) | 1.5 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Top Fluid Connections |
| Fitting Material | Quartz |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC113 when your holder is built around an upright cell with a 15 mm Z Height and top-entry tubing. The 12.5 × 12.5 mm base and 20 mm vertical window are useful when you need a compact body but still want a clear optical window area through the measurement zone.
What makes this option different
- 15 mm Z Height provides a defined bottom-to-beam-center reference for alignment.
- 4.5 × 20 mm optical window gives a tall vertical viewing area in a compact body.
- Two top quartz fluid connections keep tubing above the cell instead of projecting from the sides.
- 12.5 × 12.5 × 55 mm overall format with 900 µL nominal capacity for compact upright UV/Vis flow setups.
Structure and dimensions

Using this cell
Install the cell with the base fully supported and route both top connections so attached tubing does not pull the body out of position. Fill gradually and inspect the window area before measurement so the optical region is free of trapped bubbles and exterior droplets.
The stated 900 µL is the nominal cell volume, not a minimum working volume. The total liquid volume in your system will be higher once tubing and any added connectors are included.
First-use check
- Inspect the optical faces, body edges and both top tube connections before installation.
- Place the cell in the holder and verify that the beam passes through the intended window area at the 15 mm center height.
- Run a suitable blank after filling and recheck for bubbles or exterior droplets in the optical area.
Fit and optical alignment
View the English selection reference.
The cell body is 45 mm high with a 55 mm overall height including the fixed top tubes. Check holder depth, top clearance and tubing bend space above the cell, especially in enclosed compartments. The 15 mm Z Height is defined, but instrument fit still depends on your holder geometry and beam position.
Two-Way Light describes the measurement direction through the opposed optical faces. It does not by itself establish compatibility with a particular instrument.

Solvents and cleaning
This cell uses adhesive-bonded quartz construction and is classified as Standard 80. This construction is generally suited to room-temperature water-based samples and buffer solutions.
Avoid organic samples and organic cleaning solvents with this cell. If your method involves organic solvents, aggressive liquids, elevated temperature or long contact times, ask us to review the full conditions before use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz flow cells for changes to path length, capacity, external size, window layout, Z Height, connection style and fabrication requirements. Send your drawing or holder details, beam position, sample conditions and quantity through the contact page, and reference MQQFC113.
Additional information
| Weight | 450 g |
|---|
You must be logged in to post a review.














Reviews
There are no reviews yet.