(C104CQF) Quartz Fluorescence Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104CQF

Original price was: $418.00.Current price is: $377.00.

In Stock

C104CQF is a JGS1 quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. It includes a lid, and the uncapped cell body measures 12.5 × 12.5 × 45 mm.

In Stock

SKU: C104CQF Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CQF is a JGS1 quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. Its rectangular body gives optical access from all four side faces, and the included lid covers the open top during handling and measurement. This option suits routine filled-volume fluorescence work where you need side access around the sample region rather than a restricted two-face transmission layout.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 0.01

Choose this option

Choose C104CQF when your method uses a 10 mm fluorescence cuvette and benefits from optical access on all four sides of the cell body. The 3.5 mL nominal capacity suits filled liquid measurements, while the separate uncapped body size helps you check holder seating and leave additional space above the cell for the lid.

What makes this option different

10 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
Four-Way Light: use the available side faces to arrange illumination and collection in a measurement geometry suitable for this cell.
3.5 mL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Accompanying closure: cover the opening after preparation and allow room to remove it; no pressure or leak-tight rating is specified.
Molded 0.01 option: review the required optical-path tolerance and measurement conditions for your order when precision is central to the method.

Using this cell

Fill the cuvette so the measurement zone is properly covered and keep the optical faces clean in the beam area. When your fluorescence setup uses one pair of faces for excitation and another for observation or collection, keep the same orientation between blank and sample runs.

The lid covers the top during handling and use, but it should not be treated as a pressure seal. The 3.5 mL figure is the nominal capacity, not a minimum working volume, so the actual fill level should be checked in your instrument setup.

First-use check

Inspect the optical faces for residue, chips or fingerprints before use.
Test the uncapped body in your holder and confirm lid clearance separately.
Run your normal blank or baseline check with the same orientation you will use for samples.

Fit and optical alignment

The stated 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. Use that size to check holder seating, and allow extra space above the cell because the overall height with the lid in place is not stated here.

Z Height is not stated for this option. If your instrument depends on a fixed beam-centre height or has tight clearance around the cuvette top, check beam position and top clearance before ordering.

Solvents and cleaning

For a method with a defined optical path tolerance, specify that tolerance and its measurement conditions when selecting the Molded 0.01 option. The final requirement is agreed for the order.

Molded 0.01 is the fabrication option used for applications that may require closer optical path control in custom selection. Chemical suitability still depends on the complete assembly and on the actual liquid, concentration, temperature and contact time used in your method.

This cuvette uses a quartz body and includes a lid, so compatibility should be considered for the complete assembly rather than the cell body alone. The exact chemical limits for this option are not stated here. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and rinse promptly after use with a suitable cleaning method for your application.

Included with this option

This configuration includes an accompanying closure. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch, along with your instrument or holder information, critical dimensions, sample conditions and target quantity when you contact us.