(C104CF) Quartz Fluorescence Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104CF

Original price was: $418.00.Current price is: $377.00.

In Stock

C104CF is a JGS1 quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. This option is identified as Molded 0.01, and a closure is included.

In Stock

SKU: C104CF Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CF is a JGS1 quartz fluorescence cuvette with a standard 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. This option is also identified as Molded 0.01, so it is the version to review when that fabrication category is part of your selection as well as the usual full-size fluorescence cell geometry. A closure is included.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 0.01

Choose this option

Choose C104CF when you need a full-size four-way fluorescence cuvette and specifically want the Molded 0.01 fabrication category in this format. The four-side optical access suits fluorescence layouts that use more than one direction around the sample, while the 10 mm path keeps the cell in a familiar 1 cm format.

What makes this option different

Molded 0.01 is the precision-oriented fabrication option for this cell. Agree the required tolerances and measurement conditions for the order; the fabrication name alone is not a numerical accuracy guarantee.

Four-Way Light access around the sample region for fluorescence measurement layouts.
10 mm optical path with 3.5 mL nominal capacity in a full-size cuvette format.
JGS1 quartz body for fluorescence spectroscopy over the stated 200–2500 nm range.
Listed as Molded 0.01 for buyers selecting by fabrication category.

Using this cell

Fill the cell so the optical path passes through a continuous liquid sample, then align the cuvette faces to the excitation and collection directions used by your setup. Keep the same orientation for blank and sample measurements to avoid changing the optical presentation between runs.

The included closure covers the cell during routine handling, but this item is not presented as a pressure-rated or leak-tested component. Check the sample region for bubbles, droplets and visible residue before measurement.

First-use check

Inspect the optical faces under good light, rinse the cell with a suitable liquid for your method, and test the cuvette in the holder before running samples. A blank-filled check helps confirm seating, orientation and a clear beam path.

Fit and optical alignment

The stated outside dimensions, 12.5 × 12.5 × 45 mm, apply to the uncapped cell body. Use them to check holder seating and compartment clearance, and allow additional top space for the closure when installed.

Z Height is not listed for this SKU. If your holder or instrument requires a defined beam-center height, verify that requirement directly rather than assuming it from the body dimensions.

Solvents and cleaning

Molded 0.01 is the MQ fabrication category used for projects that place closer attention on path-length specification. For this SKU, that category is part of the selection information rather than a blanket solvent, certificate or performance claim.

The chemical limits for this exact finished assembly are not established here. If your method involves aggressive solvents, elevated temperature, long contact time or special cleaning requirements, review the complete assembly suitability before routine use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the outer optical faces gently with non-abrasive optical tissue.

Included with this option

This option is supplied as a complete cuvette with a closure included. The number of cells per order unit should be confirmed for your order if you need a specific supplied quantity.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, windows or Z Height, closures and fabrication or tolerance requirements. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your application. Discuss your requirements and quote part number C104CF.