(C012CA) Quartz Standard Cuvette, 1 mm Path, 350 µL

Weight	30 g

SKU: C012CA

Original price was: $51.00.Current price is: $46.00.

In Stock

C012CA is a quartz standard cuvette with a 1 mm optical path, Two-Way Light layout and 350 µL nominal capacity. Its open-top cell body gives direct filling access, a covering closure is included.

In Stock

SKU: C012CA Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012CA is a quartz standard cuvette for methods that use a 1 mm optical path in a slim open-top body. It combines Two-Way Light transmission with a 350 µL nominal capacity, so you can work with a short path in a narrow standard-cell format while keeping direct top access for filling, emptying and visual checks.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 3.5 × 45 mm
Cell Body Dimensions	12.5 × 3.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C012CA when your method is built around a 1 mm cuvette and you want direct access to the sample chamber from above. The included closure covers the opening after filling, but this is still an open-top cell body rather than a threaded cap, fitted stopper or demountable plate design.

What makes this option different

1 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
Two-Way Light: align the opposing optical faces with the transmission beam and use the same orientation for blank and sample readings.
350 µL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Accompanying closure: cover the opening after preparation and allow room to remove it; no pressure or leak-tight rating is specified.

Using this cell

Fill the cell from the top and make sure your liquid level covers the instrument beam during measurement. For repeatable readings, keep the same orientation for blank and sample work and remove visible bubbles before placing the cuvette in the holder.

Handle the body by the non-optical outer surfaces where possible. After measurement, empty and rinse promptly according to the liquids used in your method.

First-use check

Confirm that your method calls for a 1 mm path length.
Test the empty body in your holder before preparing a full run.
Fill with a suitable blank and check that the illuminated region is fully covered.
Inspect the optical faces for residue, fingerprints or bubbles before measurement.

Fit and optical alignment

The stated 12.5 × 3.5 × 45 mm dimensions apply to the cell body. This slim body format can matter if your holder has limited width or depth clearance, and you should also leave room above the opening for the included covering closure.

Z Height is not stated for this option, so instrument fit should not be judged from body height alone. The 350 µL figure is nominal capacity, not a minimum working volume, so beam coverage still depends on your actual fill level and holder geometry.

Solvents and cleaning

The exact chemical limits for this selected option are not stated here, so choose the sample and cleaning routine for the complete cell and closure assembly rather than assuming the same compatibility for every reagent.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with suitable non-abrasive lab or optical wipes.

Included with this option

This configuration includes an accompanying closure. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom quartz versions for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures or fabrication requirements. If you need a different fit, send your drawing or labelled sketch together with holder details, key dimensions, sample conditions and target quantity via Discuss your requirements.