Site Navigation

(C022CE) Quartz Standard Cuvette, 2 mm Path, 700 µL

Weight30 g
SKU: C022CE

Original price was: $109.00.Current price is: $99.00.

In Stock

C022CE is a JGS1 quartz standard cuvette for UV/Vis spectroscopy with a 2 mm optical path, Two-Way Light transmission and 700 µL nominal capacity. This Molded 83 version combines a short-path sample region with an open-fill body and an included lid, which is useful when your method selection also depends on how the cell will be cleaned and what sample routine it will see.

In Stock
Add to Wishlist
Add to Wishlist
SKU: C022CE Categories: , , Brand:
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022CE is a JGS1 quartz standard cuvette for UV/Vis spectroscopy with a 2 mm optical path, 700 µL nominal capacity and Two-Way Light transmission. It combines a compact short-path body with an included lid for routine covering and handling, and this exact version uses Molded 83 fabrication. The stated wavelength range for this option is 200–2500 nm.

Path Length
2 mm
Sample Volume (Nominal)
700 µL
Closure Type
Lid

Selection Specifications

Product KindCuvette
Cell TypeStandard Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length2 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)700 µL
External Dimensions12.5 × 4.5 × 45 mm
Uncapped Cell Dimensions12.5 × 4.5 × 45 mm
External Dimensions ScopeUncapped Cell
MaterialQuartz
Material GradeJGS1
MQ GradeMolded 83
Closure TypeLid
Closure IncludedYes
Fabrication MethodMolded 83

Choose this option

Choose C022CE when you need a 2 mm UV/Vis cell in a standard cuvette format and you also want this Molded 83 build option for methods where solvent routine and cleaning approach are part of the purchasing decision. The 700 µL nominal capacity works with the short path in a compact open-fill body, so you can load from the top, cover the cell during routine handling and still check holder fit from the stated uncapped dimensions.

What makes this option different

  • 2 mm optical path for UV/Vis methods written around a short transmission path.
  • Two-Way Light configuration for direct absorbance measurements through the main optical faces.
  • 700 µL nominal capacity in this short-path standard body, helping you plan sample fill and beam coverage without moving to another cell style.
  • Molded 83 fabrication, often chosen when the same 2 mm geometry must also suit solvent-based routines and the cleaning approach used in the lab.
  • Lid included for covering the open top during handling and transfer.
  • 12.5 × 4.5 × 45 mm uncapped body for checking holder seating and top-clearance needs separately from the lid.

Using this cell

Fill the cell from the top so the liquid fully covers the beam during measurement, then remove visible bubbles before reading. In this 2 mm / 700 µL combination, the short path and compact sample region make fill height and clean loading worth checking carefully, especially if you are working close to the minimum practical level for your method.

The lid is useful for routine covering during handling, but it should not be treated as a pressure-rated or leak-tight closure. Keep the same orientation for blank and sample, and handle the cuvette by the non-optical faces.

First-use check

  1. Inspect the optical faces and chamber for residue or handling marks.
  2. Test the empty fit in your holder before filling.
  3. Rinse with a suitable cleaning liquid for your method and run a blank before sample measurement.

Fit and optical alignment

The stated 12.5 × 4.5 × 45 mm dimensions apply to the uncapped cell body. Use them to check holder slot width, seating surfaces and clearance around the installed cuvette, then allow additional space above the cell if you plan to keep the lid in place.

Z Height is not established for this SKU. If your instrument or accessory requires a defined beam-center height, please verify that requirement directly rather than inferring it from the external body shape.

Solvents and cleaning

This SKU uses Molded 83 fabrication. For practical selection, that matters most when you are choosing a 2 mm open-fill cell not only by path length and volume, but also by how it will be used in a solvent-based routine and how you expect to clean it between runs.

Chemical limits for this exact assembled SKU are not established here. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. If your samples or cleaning routine involve aggressive chemicals, heat or long contact times, check the exact conditions before ordering.

Included with this option

This option is supplied as the selected C022CE cuvette with a lid included. Package quantity is not stated here, so please review the selected sales option if you need the order piece count clarified.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for related requirements involving dimensions, optical path length, sample volume, windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch together with your holder details, sample conditions and target quantity. Prototype batches typically involve 2–4 cells, with final feasibility, price and production time confirmed in the project quotation. Discuss your requirements and quote part number C022CE.

Additional information

Weight30 g

Reviews

There are no reviews yet.

Be the first to review “(C022CE) Quartz Standard Cuvette, 2 mm Path, 700 µL”

You may also like…

10%
(C022CF) Quartz Standard Cuvette, 2 mm Path, 700 µL

(C022CF) Quartz Standard Cuvette, 2 mm Path, 700 µL

30 g
In Stock
Original price was: $156.00.Current price is: $141.00.
Add to Wishlist
Add to Wishlist
10%
(C202CE) Quartz Standard Cuvette, 20 mm Path, 7 mL

(C202CE) Quartz Standard Cuvette, 20 mm Path, 7 mL

100 g
In Stock
Original price was: $181.00.Current price is: $163.00.
Add to Wishlist
Add to Wishlist
10%
Quartz 20mm Standard Cuvette, 7ml, Molded 83, Two-way Light, PTFE Cap, Pack of Two, C202CE5

Quartz 20mm Standard Cuvette, 7ml, Molded 83, Two-way Light, PTFE Cap, Pack of Two, C202CE5

100 g
In Stock
Original price was: $181.00.Current price is: $163.00.
Add to Wishlist
Add to Wishlist
10%
(C022CF1) Quartz Standard Cuvette, 2 mm Path, 700 µL

(C022CF1) Quartz Standard Cuvette, 2 mm Path, 700 µL

30 g
In Stock
Original price was: $156.00.Current price is: $141.00.
Add to Wishlist
Add to Wishlist
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare