(C104TS8) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C104TS8

Original price was: $143.00.Current price is: $129.00.

In Stock

C104TS8 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. The threaded neck, included PTFE cap and single-cuvette sale unit make it suitable when you need one covered cell for routine filled-sample work. Supplied as 1 cuvette.

In Stock

SKU: C104TS8 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TS8 is a quartz screw-top cuvette for 10 mm path measurements in a covered sample format. It combines JGS1 quartz, a Two-Way Light layout, a threaded neck and a 3.5 mL nominal capacity in a single-cuvette purchase, making it useful when you need one replacement cell or one dedicated covered cell for a specific setup. The included PTFE cap gives direct top access for filling and closure after loading.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Threaded Neck

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 38 mm
Overall Height without Closure	54 mm
Body Height	38 mm
Overall Height with Closure	58 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Threaded Neck

Choose this option

Choose C104TS8 when you want a single 10 mm quartz cuvette with a screw-top opening instead of an open cell or a multi-piece sales pack. The covered sample format is useful for transferring the filled cell to the instrument and keeping the sample closed during routine handling. Its Two-Way Light layout suits straight-through measurements across the defined optical faces.

What makes this option different

Single-cuvette sale unit for replacement or one-cell purchasing.
10 mm optical path with 3.5 mL nominal capacity for conventional filled-cell methods.
Threaded neck and included PTFE screw cap for top filling in a covered format.
Two-Way Light configuration for straight-through optical access.
Molded 83 fabrication with source-described qualitative resistance to acids, alkalis and organic liquids, without detailed operating conditions.

Using this cell

Fill the cell so the liquid covers the beam region used by your instrument, then fit the cap before moving it into position. Keep the optical faces clean and dry on the outside, and remove bubbles from the transmission path before measurement.

The screw cap gives a covered sample chamber, but no pressure limit is stated for this SKU. Use it as a covered measurement cell rather than as a pressure-rated assembly.

First-use check

Inspect the quartz faces and threaded neck before first use, rinse with a liquid suitable for your method, and check that the cap seats properly. Run a blank first and confirm that your fill level fully covers the beam position used in your instrument.

Fit and optical alignment

The body footprint is 12.5 × 12.5 mm with a 38 mm body height. The stated overall height is 54 mm without the cap and 58 mm with the cap fitted, which are the key figures to check for compartment clearance and access above the holder.

Z Height is not established for this item. If your holder, fluorescence accessory or instrument depends on a specific beam-center height, verify that point separately. The 3.5 mL value is a nominal capacity, not a minimum working volume.

Solvents and cleaning

This cuvette is listed under Molded 83 fabrication. The source describes qualitative resistance to acids, alkalis and organic liquids, but it does not define concentration, temperature, exposure time or complete closure-contact conditions. Choose sample and cleaning conditions for the full assembly, including the closure, and review exact conditions before aggressive or extended-contact use.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive tissue or laboratory wipes.

Included with this option

1 quartz screw-top cuvette. A PTFE screw closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your application. Discuss your requirements and quote part number C104TS8.