(C104CA1) Quartz Fluorescence Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104CA1

Original price was: $76.00.Current price is: $69.00.

In Stock

C104CA1 is a JGS1 quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity for fluorescence spectroscopy. It is sold as a pack of 2 cuvettes, with closure supply included.

In Stock

SKU: C104CA1 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CA1 is a JGS1 quartz fluorescence cuvette for fluorescence spectroscopy with a standard 10 mm optical path and Four-Way Light geometry. Its 3.5 mL nominal capacity suits routine sample handling, while the square cuvette body supports optical access from multiple sides for fluorescence measurement setups. This MQ offer is sold as a pack of 2 cuvettes, with closure supply included.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C104CA1 when your method is built around a 10 mm fluorescence cuvette and you need side access as well as the main transmission path. This format suits fluorescence work that uses multiple optical directions, while keeping a familiar cuvette size and a moderate nominal fill capacity for everyday laboratory handling.

What makes this option different

10 mm optical path: fits methods designed around the standard 1 cm cuvette path length.
Four-Way Light configuration: gives optical access on four sides for fluorescence geometries that use more than one direction.
3.5 mL nominal capacity: provides a practical nominal fill volume for routine fluorescence measurements.
Closure included: the cuvette is supplied with a closure, so you are ordering a closed-cell option rather than an open-top body alone.

Using this cell

Fill the cell in line with your method, then keep the outer optical faces clean and dry before placing it in the instrument. Check that the light path area is free of bubbles, residue or droplets, and keep the same cell orientation for blank and sample measurements when your procedure depends on a fixed fluorescence geometry.

Because this is a Four-Way Light cuvette, it helps to define which faces your setup uses for excitation and which direction is used for observation or collection. Marking or consistently tracking orientation during a run can make day-to-day handling easier.

First-use check

Inspect the optical faces for handling marks, chips or residue, then rinse the cell using a cleaning method suitable for your application. Before running samples, place the empty cuvette in the holder to confirm seating, closure clearance and the orientation you plan to use.

Fit and optical alignment

The stated outer dimensions apply to the uncapped cell: 12.5 × 12.5 × 45 mm. Use those body dimensions when checking your holder opening and compartment clearance, and allow extra space for any installed closure above the cell body.

Z Height is not stated for this option. If your instrument or holder depends on a specific beam-center height, check that requirement before ordering rather than relying on the outer body size alone.

Solvents and cleaning

This listing does not define a full chemical compatibility range for the complete cell and closure assembly. If your work involves demanding solvents or cleaning conditions, review the general fabrication background here: Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

Pack of 2 fluorescence cuvettes, with closure supply included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a related JGS1 quartz cell with different dimensions, path length, sample volume, optical access or closure details, we can review a custom version. Send a dimensioned drawing or labelled sketch, your instrument or holder information, and your sample conditions via Contact us, and quote C104CA1.